Advertisements
Advertisements
प्रश्न
A basic communication system consists of ______.
- transmitter.
- information source.
- user of information.
- channel.
- receiver.
Choose the correct sequence in which these are arranged in a basic communication system:
विकल्प
ABCDE.
BADEC.
BDACE.
BEADC.
उत्तर
A basic communication system consists of BADEC.
Explanation:
A basic communication system consists of an information source, a transmitter, a link (channel) and a receiver or a communication system is a set-up used in the transmission and reception of information from one place to another.
The whole system consists of several elements in a sequence. It can be represented in the diagram given below:
APPEARS IN
संबंधित प्रश्न
What is the function of a 'Repeater' used in communication system?
Write the functions of the following in communication systems:
Transmitter
Write the functions of the following in communication systems:
Demodulator
Explain the terms Demodulation used in Communication System.
Distinguish between broadcast mode and point-to-point mode of communication and give one example for each.
Explain the basic concept of mobile telephoning ?
A 1 KW signal is transmitted using a communication channel which provides attenuation at the rate of – 2dB per km. If the communication channel has a total length of 5 km, the power of the signal received is `["gain in dB" = 10 log ("P"_0/"P"_"i")]`
Audio sine waves of 3 kHz frequency are used to amplitude modulate a carrier signal of 1.5 MHz. Which of the following statements are true?
- The sideband frequencies are 1506 kHz and 1494 kHz.
- The bandwidth required for amplitude modulation is 6 kHz.
- The bandwidth required for amplitude modulation is 3 MHz.
- The side band frequencies are 1503 kHz and 1497 kHz.
Figure shows a communication system. What is the output power when input signal is of 1.01 mW? (gain in dB = 10 log10 (Po/Pi).
An audio signal is modulated by a carrier wave of 20 MHz such that the bandwidth required for modulation is 3 kHz. Could this wave be demodulated by a diode detector which has the values of R and C as
- R = 1 kΩ, C = 0.01 µF.
- R = 10 kΩ, C = 0.01 µF.
- R = 10 kΩ, C = 0.1 µF.
