Advertisements
Advertisements
प्रश्न
A convex lens of focal length 20 cm is placed coaxially in contact with a concave lens of focal length 25 cm. Determine the power of the combination. Will the system be converging or diverging in nature?
उत्तर
We have
focal length of convex lens, f1 = +20cm = +0.20 m
focal length of convex lens, f2 = - 25cm = +0.25 m
Equivalent focal length, `F = 1/(f_1)+1/(f_1)=1/20+1/(-25)=1/(100)`
∴ F = 100cm
Power of convex lens, `P_1 = 1/f_1=1/0.20`
Power of concave lens, `P_2 = 1/f_2 = 1/(-0.25)`
Power of the combination, p = p1 + p2
`= 1/0.20 +1/-0.25`
`=100/20 +100/-25`
=`(500 - 400)/100`
=`100/100`
= 1 D
The focal length of the combination = 1 m = 100 cm
As the focal length is in positive, the system will be converging in nature.
APPEARS IN
संबंधित प्रश्न
An object is placed 15 cm in front of a convex lens of focal length 10 cm. Find the nature and position of the image formed. Where should a concave mirror of radius of curvature 20 cm be placed so that the final image is formed at the position of the object itself?
A mobile phone lies along the principal axis of a concave mirror. Show, with the help of a suitable diagram, the formation of its image. Explain why magnification is not uniform.
Suppose the lower half of the concave mirror's reflecting surface is covered with an opaque material. What effect this will have on the image of the object? Explain
Draw a ray diagram to show image formation when the concave mirror produces a real, inverted and magnified image of the object.
Obtain the mirror formula and write the expression for the linear magnification.
Use Huygens’ geometrical construction to show the behavior of a plane wavefront.
(i) Passing through a biconvex lens;
(ii) Reflecting by a concave mirror
A concave mirror of radius R is kept on a horizontal table (See figure). Water (refractive index = μ) is poured into it up to a height h. Where should an object be placed so that its image is formed on itself?
The convex surface of a thin concavo-convex lens of glass of refractive index 1.5 has a radius of curvature 20 cm. The concave surface has a radius of curvature 60 cm. The convex side is silvered and placed on a horizontal surface as shown in figure. (a) Where should a pin be placed on the axis so that its image is formed at the same place? (b) If the concave part is filled with water (μ = 4/3), find the distance through which the pin should be moved so that the image of the pin again coincides with the pin.
Two concave mirrors of equal radii of curvature R are fixed on a stand facing opposite directions. The whole system has a mass m and is kept on a frictionless horizontal table following figure. Two blocks A and B, each of mass m, are placed on the two sides of the stand. At t = 0, the separation between A and the mirrors is 2 R and also the separation between B and the mirrors is 2 R. The block B moves towards the mirror at a speed v. All collisions which take place are elastic. Taking the original position of the mirrors-stand system to be x = 0 and X-axis along AB, find the position of the images of A and B at t = (a) `R/v` (b) `3R/v` (c) `5R/v`.
In the case of a concave mirror of focal length f , when an object is kept between f and 2 f , show that its image is formed beyond 2 f .
