Advertisements
Advertisements
प्रश्न
A cylindrical pillar is 50 cm in diameter and 3.5 m in height. Find the cost of painting the curved surface of the pillar at the rate of Rs.12.50 per m2.
`["Assume "pi=22/7]`
उत्तर
Height (h) cylindrical pillar = 3.5 m
Radius (r) of the circular end of pillar = 50/2 = 25cm = 0.25m
CSA of pillar = 2πrh
`=(2xx22/7xx0.25xx3.5)m^2`
`=(44xx0.125)m^2`
= 5.5 m2
Cost of painting 1 m2 area = Rs 12.50
Cost of painting 5.5 m2 area = Rs (5.5 × 12.50)
= Rs 68.75
Therefore, the cost of painting the CSA of the pillar is Rs 68.75.
APPEARS IN
संबंधित प्रश्न
The area of the base of a right circular cylinder is 616 cm2 and its height is 2.5 cm. Find the curved surface area of the cylinder.
The ratio between the curved surface area and the total surface area of a right circular cylinder is 1 : 2. Prove that its height and radius are equal.
Twenty one cylindrical pillars of the Parliament House are to be cleaned. If the diameter of each pillar is 0.50 m and height is 4 m, what will be the cost of cleaning them at the rate of Rs 2.50 per square metre?
A rectangular strip 25 cm × 7 cm is rotated about the longer side. Find the volume of the solid, thus generated.
From a tap of inner radius 0.75 cm, water flows at the rate of 7 m per second. Find the volume in litres of water delivered by the pipe in one hour.
A well with 10 m inside diameter is dug 8.4 m deep. Earth taken out of it is spread all around it to a width of 7.5 m to form an embankment. Find the height of the embankment.
Two circular cylinders of equal volume have their heights in the ratio 1 : 2 Ratio of their radii is
Radius of base of a cylinder is 20 cm and its height is 13 cm, find its curved surface area and total surface area. (π = 3.14)
A rectangular metal sheet 36cm x 20cm can be formed into a right circular cylinder, either by rolling its length or by rolling along its breadth. Find the ratio of the volumes of the two cylinders thus formed.
In the example given below, the radius of the base of a cylinder and its height is given. Then find the curved surface area and total surface area.
r = 70 cm, h = 1.4 cm
