Advertisements
Advertisements
प्रश्न
A cylindrical vessel, without lid, has to be tin-coated on its both sides. If the radius of the base is 70 cm and its height is 1.4 m, calculate the cost of tin-coating at the rate of Rs. 3.50
per 1000 cm2.
उत्तर
Given that
r = 70cm, h =1.4m =140cm
∴Area to be tin coated=`2(2pirh+pir^2)=2pir(2h+r)`
=`2xx22/7xx70(280+70)`
`=154000cm^2`
Required cost =`(154000xx3.50)/1000=Rs.539.`
APPEARS IN
संबंधित प्रश्न
A metal pipe is 77 cm long. The inner diameter of a cross section is 4 cm, the outer diameter being 4.4 cm.(See the given figure)
(i) inner curved surface area,
(ii) outer curved surface area,
(iii) total surface area.
`["Assume "pi=22/7]`
The ratio between the curved surface area and the total surface area of a right circular cylinder is 1 : 2. Prove that its height and radius are equal.
Find the volume of a cylinder, if the diameter (d) of its base and its altitude (h) are: d = 7 m, h = 24 m .
A well with 10 m inside diameter is dug 8.4 m deep. Earth taken out of it is spread all around it to a width of 7.5 m to form an embankment. Find the height of the embankment.
The pillars of a temple are cylindrically shaped. If each pillar has a circular base of radius 20 cm and height 10 m. How much concrete mixture would be required to build 14 such pillars?
A hollow garden roller, 63 cm wide with a girth of 440 cm, is made of 4 cm thick iron. Find the volume of the iron.
The ratio between the radius of the base and height of a cylinder is 2 : 3. If its volume is 1617 cm3, find the total surface area of the cylinder.
Vertical cross-section of a right circular cylinder is always a
A cylinder has a diameter 20cm. The area of the curved surface is 1100cm2. Find the height and volume of the cylinder.
In the example given below, the radius of the base of a cylinder and its height is given. Then find the curved surface area and total surface area.
r = 2.5 cm, h = 7 cm
