Advertisements
Advertisements
प्रश्न
A fixed pulley is driven by a 100 kg mass falling at a rate of 8.0 m in 4.0 s. It lifts a load of 75.0 kgf. Calculate the efficiency of the pulley.
उत्तर
Load pulled by the pulley is L = 75 × 10 = 750 N
Therefore, M.A. is
M.A. = `"L"/"E" = 750/1000 = 0.75`
When the effort moves by a distance d downwards, the load moves by the same distance upwards. So, V.R. = 1
Hence, efficiency is
η = `"M.A."/"V.R." = 0.75/1` = 0.75 (or 75 %)
APPEARS IN
संबंधित प्रश्न
A coolie uses a sloping wooden plank of length 2.0 m to push up a drum of mass 100 kg into the truck at a height 1.0 m.
(a) What is the mechanical advantage of the sloping plank?
(b) How much effort is needed to push the drum up into the truck?
What assumption have you made in arriving at the answer in part (b) above?
A gear system has one wheel with 10 teeth and the other wheel with 50 teeth. Calculate the gain in speed and the gain in torque that you can obtain using them. What will be the gear ration in each case?
A Woman draws water from a well using a fixed pulley. The mass of bucket and water together is 6 kg. The force applied by the woman is 70 N. Calculate the mechanical advantage. (Take g = 10 m s-2)
In following figure, shows a block and tackle system of pulleys used to lift a load.
- How many strands of tackle are supporting the load?
- Draw arrows to represent tension T in each strand.
- What is the mechanical advantage of the system?
- When load is pulled up by a distance 1 m, how far does the effort end move?
- How much effort is needed to lift a load of 100 N?
- What will be it's V.R. if the weight of the movable block is doubled?
A block and tackle system has the velocity ratio 3. Draw a labelled diagram of the system indicating the points of application and the directions of load L and effort E. A man can exert a pull of 200 kgf. What is the maximum load he can raise with this pulley system is its efficiency is 60%?
In the fig draw a tackle to lit a load by applying the torce in a convinient direction. Mark the position of load and effort.
(i) If the load is raised by 1 m, Through what distance will the effort move?
(ii) State how many strands of tackle are supporting the load?
(iii) What is the mechanical advantage of the sysytem?
A pair of nut crackers is 12 cm long. An effort of 10 gf is required to crack a nut which is passed at a point 3 cm from the finger. Calculate the load Fig.
A block and tackle system has the velocity ratio 3. Draw a labelled diagram of the system indicating the points of application and the directions of load L and effort E. A man can exert a pull of 200 kgf. If the effort end moves a distance 60 cm, what distance does the load move?
A woman draws water from a well using a fixed pulley. The mass of the bucket and water together is 60 kg. The force applied by the woman is 70 N. Calculate the mechanical advantage. [Take g = 10 m/s2].
The mechanical advantage of a machine is 5 and its efficiency is 80%. It is used to lift a load of 200 kgf to a height of 20 m. Calculate:
(i) The effort required, and
(ii) The work done on the machine (g = 10 ms−2).
