Advertisements
Advertisements
प्रश्न
A machine is driven by a 50 kg mass falling at a rate of 10.0 m in 5s. It lifts n load of 250 kgf. Taking the force of gravity on 1 kg mass as 10 N. Calculate the power input to the machine. If the efficiency of the machine is 60%, find the height to which the load is raised in 5s.
उत्तर
Given : Effort E = 50 Kgf = 50 × 10 N = 500 N, dE = 10.0 m, t = 5s.
L = 250 kgf = 250 × 10 N = 2500 N, efficiency = 60% = 0.6
Power input to the machine =`"Effort×Displacement of effort"/"Time"`
`=(500xx10.0)/5`
= 1000 W.
Let the load is raised to a height dL in 5s, then
Efficiency =`"Power output"/"Power input"=("L"×("d"_"L"//"t"))/("E"×("d"_"E"//"t"))`
or 0.6 = `(2500×"d"_"L")/(500×10)`
or dL =`(500×10×0.6)/2500`
= 1.2 m.
APPEARS IN
संबंधित प्रश्न
A gear system has one wheel with 10 teeth and the other wheel with 50 teeth. Calculate the gain in speed and the gain in torque that you can obtain using them. What will be the gear ration in each case?
A fixed pulley is driven by a 100 kg mass falling at a rate of 8.0 m in 4.0s. It lifts a load of 75.0 kgf. Calculate the power input to the pulley taking the force of gravity on 1 kg as 10 N.
In a block and tackle system consisting of 3 pulleys, a load of 75 kgf is raised with an effort of 25 kgf. Find:
- the mechanical advantage,
- velocity ratio and
- efficiency.
In following figure, shows a block and tackle system of pulleys used to lift a load.
- How many strands of tackle are supporting the load?
- Draw arrows to represent tension T in each strand.
- What is the mechanical advantage of the system?
- When load is pulled up by a distance 1 m, how far does the effort end move?
- How much effort is needed to lift a load of 100 N?
- What will be it's V.R. if the weight of the movable block is doubled?
A block and tackle system has the velocity ratio 3. Draw a labelled diagram of the system indicating the points of application and the directions of load L and effort E. A man can exert a pull of 200 kgf. What is the maximum load he can raise with this pulley system is its efficiency is 60%?
You are given four pulleys and three strings. Draw a neat and labelled diagram to use them so as to obtain a maximum mechanical advantage equal to 8. In you diagram make the directions of load, effort and tension in each strand. What assumptions have you made to obtain the required mechanical advantage?
Complete the following sentences:
1 J = ........ Erg.
A pair of nut crackers is 12 cm long. An effort of 10 gf is required to crack a nut which is passed at a point 3 cm from the finger. Calculate the load Fig.
A block and tackle system has the velocity ratio 3. Draw a labelled diagram of the system indicating the points of application and the directions of load L and effort E. A man can exert a pull of 200 kgf. If the effort end moves a distance 60 cm, what distance does the load move?
