Advertisements
Advertisements
प्रश्न
An electric fan runs from the 230 V mains. The current flowing through it is 0.4 A. At what rate is electrical energy transferred by the fan?
उत्तर
Rate of electrical energy transfer = Power consumed
∴ Rate of electrical energy transfer,
P = VI
=`230Vxx0.4A`
=92W=92 J/s
APPEARS IN
संबंधित प्रश्न
When an electric lamp is connected to 12 V battery, it draws a current of 0.5 A. The power of the lamp is:
(a) 0.5 W
(b) 6 W
(c) 12 W
(d) 24 W
A bulb of 40 W is used for 12.5 h each day for 30 days. Calculate the electrical energy consumed.
A bulb with rating 250 V, 100 W is connected to a power supply of 220 V situated 10 m away using a copper wire of area of cross-section 5 mm2. How much power will be consumed by the connecting wires? Resistivity of copper = 1.7 × 10−8 Ωm
The diagram 31 shows a 3 terminal plug socket.
(i) What is the purpose of the terminal E?
(ii) To which part of the appliance is the terminal E connected?
(iii) To which wire L or N, is the fuse connected and why?
Tick(✓) the correct choice in the following:
In the circuit shown in the following fig, the e.m.f. of the cell is 4 volts, the current
flowing through the resistor is
Why is heating element wound on a long porcelain rod in a room heater.
How does the heat produced by die passage of current in a metallic wire depend on the time of passage of current in the wire?
Three 250 W heaters are connected in parallel to a 100 V supply, Calculate total current taken from the supply.
An Electric bulb is marked 100 W, 230 V. What find the energy consumed by the bulb in one hour.
Compare the power used in the 2 Ω resistor in each of the following circuits:
- a 6 V battery in series with 1 Ω and 2 Ω resistors
- a 4 V battery in parallel with 12 Ω and 2 Ω resistors.
