Advertisements
Advertisements
प्रश्न
Calculate the quality factor of a series LCR circuit with L = 2.0 H, C = 2μF and R = 10 Ω. Mention the significance of quality factor in LCR circuit.
उत्तर
Given,
L = 2.0 H
C = 2μF = 2 × 10−6 F
R = 10 Ω
Now,Q-fector `= 1/R sqrtL/C`
`=1/10sqrt(2/(2 xx 10^-6))`
`= 1/(10 xx 10^-3) = 1/10^-2 =100`
Quality factor is also defined as
`Q =2pi f xx text{Energy Stored}/text{Power loss}`
So higher the value of Q means the energy loss is at lower rate relative to energy stored i.e. the oscillations will die slowly and damping would be less.
APPEARS IN
संबंधित प्रश्न
In a series LR circuit XL = R and power factor of the circuit is P1. When capacitor with capacitance C such that XL = XC is put in series, the power factor becomes P2. Calculate P1/P2.
A 10 μF capacitor is charged to a 25 volt of potential. The battery is disconnected and a pure 100 m H coil is connected across the capacitor so that LC oscillations are set up. Calculate the maximum current in the coil.
Answer in brief.
The total impedance of a circuit decreases when a capacitor is added in series with L and R. Explain why?
Calculate the value of the capacity in picofarad, which will make 101.4 microhenry inductance to oscillate with a frequency of one megahertz.
A charged 10 microfarad capacitor is connected to an 81 mH inductor. What is the angular frequency of free oscillations of the circuit?
Electrical oscillations of desired frequency can be obtained by ______.
The magnetic field energy in an inductor changes from maximum value to minimum value in 10 ms, when connected to an a.c. source. The frequency of the source is ______.
In an oscillating LC circuit, the maximum charge on the capacitor is Q. The charge on the capacitor, when the energy is stored equally between the electric and magnetic field is ____________.
The natural frequency (ca0) of oscillations in LC circuit is given by ______.
In an oscillating system, a restoring force is a must. In an LC circuit restoring force is provided by ______.
