हिंदी

Calculate the Quantity of Heat that Will Be Produced in a Coil of Resistance 75 ω If a Current of 2a is Passed Through It for 2 Minutes. - Physics

Advertisements
Advertisements

प्रश्न

Calculate the quantity of heat that will be produced in a coil of resistance 75 Ω if a current of 2A is passed through it for 2 minutes.

टिप्पणी लिखिए

उत्तर

R = 75 Ω, i = 2A, t = 2 minutes = 2 × 60 s = 120 s

Heat energy produced in the coil, H = i2Rt

= 22 × 75 × 120

= 300 × 120 = 36000 J

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
अध्याय 7: Electricity - Short Numericals

APPEARS IN

आईसीएसई Physics [English] Class 10
अध्याय 7 Electricity
Short Numericals | Q 11

संबंधित प्रश्न

If the equivalent resistance is to be increased, then the number of resistances should be connected in

  1. Series
  2. Parallel
  3. Mixed arrangement
  4. None of the above

(i) Two sets A and B, of three bulbs each, are glowing in two separate rooms. When one of the bulbs in set A is fused, the other two bulbs also cease to glow. But in set B, when one bulb fuses, the other two bulbs continue to glow. Explain why this phenomenon occurs.

(ii) Why do we prefer arrangements of Set B for house circuiting?


Write down an expression for the resistance of a metallic wire in terms of the resistivity.


Define resistivity of a metal.

What do you mean by power rating of an electrical appliance? How do you use it to calculate 

(a) the resistance of the appliance and

(b) the safe limit of the current in it, while in use?


State expression for Resistance connected in parallel.


Three resistors of 6Ω, 3Ω and 2Ω are connected together so that their total resistance is greater than 6Ω but less than 8Ω Draw a diagram to show this arrangement and calculate its total resistance.


Illustrate-combination of cells e.g., three cells, in series, explaining the combination briefly. Obtain an expression for current ‘i’ in the combination.


Two resistors of 4Ω and 6Ω are connected in parallel to a cell to draw 0.5 A current from the cell.
Draw a labelled circuit diagram showing the above arrangement.


If R1 and R2 be the resistance of the filament of 40 W and 60 W respectively operating 220 V, then:


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×