हिंदी
कर्नाटक बोर्ड पी.यू.सी.पीयूसी विज्ञान कक्षा ११

Consider the Equations P = Lim △ S → 0 F △ S and P1 - P2 = Pgz. in an Elevator Accelerating Upward - Physics

Advertisements
Advertisements

प्रश्न

Consider the equations `P=lim_(triangles->0)"F"/(triangle"S")` and P1 - P2 = pgz. In an elevator accelerating upward

विकल्प

  • both the equations are valid

  • the first is valid but not the second

  • the second is valid but not the first

  • both are invalid

MCQ

उत्तर

the first is valid but not the second
For a point inside the elevator, pressure can be defined as `P=lim_(triangles->0)"F"/(triangle"S")`.  It is independent of the acceleration of the elevator.
The modified form of the second equation, which will be valid in the given case, is given by P1 - P2 = ρ(g+a0)z

Here, acceleration a0 (say) due to elevator accelerating upwards is also taken into account.

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
अध्याय 13: Fluid Mechanics - MCQ [पृष्ठ २७१]

APPEARS IN

एचसी वर्मा Concepts of Physics Vol. 1 [English] Class 11 and 12
अध्याय 13 Fluid Mechanics
MCQ | Q 2 | पृष्ठ २७१

संबंधित प्रश्न

Name and state the principle on which a hydraulic press works. Write one use of hydraulic press.


What should be the ratio of area of cross section of the master cylinder and wheel cylinder of a hydraulic brake so that a force of 15 N can be obtained at each of its brake shoe by exerting a force of 0.5 N on the pedal ?


A force of 50 kgf is applied to the smaller piston of a hydraulic machine. Neglecting friction, find the force exerted on the large piston, if the diameters of the pistons are 5 cm and 25 cm respectively.


The area of cross-sections of the pump plunger and press plunger of a hydraulic press is 0.02 m2 and 8 m2 respectively. If the hydraulic press overcomes a load of 800 kgf, calculate the force acting on the pump plunger.


If the mechanical advantage of the handle of the pump plunger is 8, calculate the force applied at the end of the handle of the pump plunger.


Select the correct option.

Pressure applied in liquids is transmitted with undiminished force


At a given place, a barometer records 70 cm of Hg. If the mercury in the barometer is replaced by water, what would be resulting in reading? (Density of Hg = 13600 kg/m3; Density of water = 1000 kg/m3)


The pressure in the water pipe on the ground floor of a building is 40000 pascals, whereas on the first floor it’s 10000 pascals. Find the height of the first floor. (Acceleration due to gravity g = 10 ms−2)


How does the liquid pressure on a diver change according to the following condition:

When the driver moves horizontally


How does the liquid pressure on a diver change according to the following condition:

When the driver moves to the greater depth?


The following figure shows a manometer containing a liquid of density p. The limb P of the manometer is connected to a vessel V and the limb Q is open to atmosphere. The difference in the levels of liquid in the two limbs of the manometer is h as shown in the diagram. The atmospheric pressure is P0.

(i) What is the pressure on the liquid surface in the limb Q?

(ii) What is the pressure on the liquid surface in the limb P?


What is meant by the term buoyancy?

Define up thrust and state its SI unit.

In what direction does the buoyant force act on a body due to a liquid?

Why is a force needed to keep a block of cork inside water?

Do all liquids exert pressure?


State the principle on which Brahma press depends.


For what purpose is the acid battery hydrometer used?


State Pascal’s law.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×