Advertisements
Advertisements
प्रश्न
Read the following statements regarding open-cast mining and choose the correct option:
- This is the cheapest way of mining.
- The output is in large quantity.
- It requires specially designed lifts, drills.
- It requires special ventilation system.
विकल्प
Only I and II are correct.
Only III and IV are correct.
Only I and III are correct.
Only II and IV are correct.
उत्तर
Only I and II are correct.
Explanation:
Deep shaft mining is suitable for options III and IV.
APPEARS IN
संबंधित प्रश्न
Primary Economic activity not related directly to latitudinal locations:
Give geographical reasons:
Mining is developed in Chhota Nagpur plateau of India.
Mining is dependent on the extraction of naturally occurring minerals. Explain.
Primary economic activity not related directly to latitudinal locations:
Assertion: Location and climate affect on primary activities.
Reason: Location and climate is not affecting on mining.
Assertion: Mining is developed in Chhota Nagpur plateau in India.
Reason: Chhota Nagpur plateau have large deposits of coal and iron ore.
Give geographical reason
Mining is developed in the Chhota Nagpur plateau of India.
Define mining.
What is the status of mining in the developed and developing economies of the world?
Which one of the following is not a method of mining?
Depending on the mode of occurrence and the nature of the ore, mining is of two types: Surface and underground mining. Surface mining is also known as open cast mining is the easiest and the cheapest way of mining minerals that occur close to the surface, overhead costs such as safety precautions and equipment are relatively low in this method. The output is both large and rapid. When the ore lies deep below the surface, an underground mining method (shaft method) has to be used. In this method, vertical shafts have to be sunk, from where underground galleries radiate to reach the minerals. Minerals are extracted and transported to the surface through these passages. It requires specially designed lifts, drills, haulage, vehicles, ventilation system for safe and efficient movement of people and materials. This method is risky. Poisonous gages, fires, floods, and cave-in bad to fatal accidents. The developed economies are retreating from mining, processing, and refining stages of production due to high labour costs, while the developing countries with large labour forces and striving for a higher standard of living are becoming more important. Several countries of Africa and a few of South America and Asia have over fifty percent of the earnings from minerals alone.
Which method of mining is very risky?
Depending on the mode of occurrence and the nature of the ore, mining is of two types: Surface and underground mining. Surface mining is also known as open cast mining is the easiest and the cheapest way of mining minerals that occur close to the surface, overhead costs such as safety precautions and equipment are relatively low in this method. The output is both large and rapid. When the ore lies deep below the surface, an underground mining method (shaft method) has to be used. In this method, vertical shafts have to be sunk, from where underground galleries radiate to reach the minerals. Minerals are extracted and transported to the surface through these passages. It requires specially designed lifts, drills, haulage, vehicles, ventilation system for safe and efficient movement of people and materials. This method is risky. Poisonous gages, fires, floods, and cave-in bad to fatal accidents. The developed economies are retreating from mining, processing, and refining stages of production due to high labour costs, while the developing countries with large labour forces and striving for a higher standard of living are becoming more important. Several countries of Africa and a few of South America and Asia have over fifty percent of the earnings from minerals alone.
For which reasons fear of fatal accidents remain in underground mining?
Depending on the mode of occurrence and the nature of the ore, mining is of two types: Surface and underground mining. Surface mining is also known as open cast mining is the easiest and the cheapest way of mining minerals that occur close to the surface, overhead costs such as safety precautions and equipment are relatively low in this method. The output is both large and rapid. When the ore lies deep below the surface, an underground mining method (shaft method) has to be used. In this method, vertical shafts have to be sunk, from where underground galleries radiate to reach the minerals. Minerals are extracted and transported to the surface through these passages. It requires specially designed lifts, drills, haulage, vehicles, ventilation system for safe and efficient movement of people and materials. This method is risky. Poisonous gages, fires, floods, and cave-in bad to fatal accidents. The developed economies are retreating from mining, processing, and refining stages of production due to high labour costs, while the developing countries with large labour forces and striving for a higher standard of living are becoming more important. Several countries of Africa and a few of South America and Asia have over fifty percent of the earnings from minerals alone.
Shaft method mining is used for the minerals which ______
Depending on the mode of occurrence and the nature of the ore, mining is of two types: Surface and underground mining. Surface mining is also known as open cast mining is the easiest and the cheapest way of mining minerals that occur close to the surface, overhead costs such as safety precautions and equipment are relatively low in this method. The output is both large and rapid. When the ore lies deep below the surface, an underground mining method (shaft method) has to be used. In this method, vertical shafts have to be sunk, from where underground galleries radiate to reach the minerals. Minerals are extracted and transported to the surface through these passages. It requires specially designed lifts, drills, haulage, vehicles, ventilation system for safe and efficient movement of people and materials. This method is risky. Poisonous gages, fires, floods, and cave-in bad to fatal accidents. The developed economies are retreating from mining, processing, and refining stages of production due to high labour costs, while the developing countries with large labour forces and striving for a higher standard of living are becoming more important. Several countries of Africa and a few of South America and Asia have over fifty percent of the earnings from minerals alone.
Developing economies are increasing mining, processing, and refinery stages of production because of ______
Depending on the mode of occurrence and the nature of the ore, mining is of two types: Surface and underground mining. Surface mining is also known as open cast mining is the easiest and the cheapest way of mining minerals that occur close to the surface, overhead costs such as safety precautions and equipment are relatively low in this method. The output is both large and rapid. When the ore lies deep below the surface, an underground mining method (shaft method) has to be used. In this method, vertical shafts have to be sunk, from where underground galleries radiate to reach the minerals. Minerals are extracted and transported to the surface through these passages. It requires specially designed lifts, drills, haulage, vehicles, ventilation system for safe and efficient movement of people and materials. This method is risky. Poisonous gages, fires, floods, and cave-in bad to fatal accidents. The developed economies are retreating from mining, processing, and refining stages of production due to high labour costs, while the developing countries with large labour forces and striving for a higher standard of living are becoming more important. Several countries of Africa and a few of South America and Asia have over fifty percent of the earnings from minerals alone.
Which method of mining is less risky?
"Future of shifting cultivation is bleak". Which of the following statement is/are correct in context of this?
Primary activity that is practised on a larger scale is
Which of the following is an economic factor determining the profitability of mining activities?
