Advertisements
Advertisements
प्रश्न
The current in a discharging LR circuit is given by i = i0 e−t/τ , where τ is the time constant of the circuit. Calculate the rms current for the period t = 0 to t = τ.
उत्तर
As per the question,
`i = i_0e (-t)/tau`
We need to find the rms current. So, taking the average of i within the limits 0 to τ and then dividing by the given time period τ, we get:
`i_{rms}^2 =1/τ ∫_0^τ i_0^2 e^-2t//τ dt`
`⇒ i_{rms}^2 = i_0^2/τ ∫_0^tau e^-"2t"// τ dt `
=`t_0^2/τ xx [-r/2 e^-2t//tau ]_0^tau`
= `-i_0^2/2 xx r/2xx[e^-2 - 1]`
= `t_0^2/2 (1 - 1/e^2)`
`i_rms=i_0/e sqrt((e^2 - 1)/2)`
APPEARS IN
संबंधित प्रश्न
When an AC source is connected to an ideal inductor show that the average power supplied by the source over a complete cycle is zero.
In a series LR circuit, XL = R and power factor of the circuit is P1. When capacitor with capacitance C such that XL = XC is put in series, the power factor becomes P2. Calculate P1/P2
An A.C. generator generating an emf of ε = 300 sin (100 πt) V is connected to a series combination of 16μ F capacitor, 1 H inductor and 100 Ω resistor.
Calculate :
1) An impedance of the circuit at the given frequency.
2) Resonant frequency `f_0`
3)Power factor at the resonant frequency `f_0`.
For a given a.c., i = im sin ωt, show that the average power dissipated in a resistor R over a complete cycle is `1/2I_m^2` R .
In a circuit, containing a capacitor and an AC source, the current is zero at the instant the source voltage is maximum. Is it consistent with Ohm's Law?
An electric bulb is designed to consume 55 W when operated at 110 volts. It is connected to a 220 V, 50 Hz line through a choke coil in series. What should be the inductance of the coil for which the bulb gets correct voltage?
In a series LCR circuit with an AC source, R = 300 Ω, C = 20 μF, L = 1.0 henry, εrms = 50 V and ν = 50/π Hz. Find (a) the rms current in the circuit and (b) the rms potential difference across the capacitor, the resistor and the inductor. Note that the sum of the rms potential differences across the three elements is greater than the rms voltage of the source.
Answer the following question.
Show that an ideal inductor does not dissipate power in an ac circuit.
In previous questions 3 and 4, what is the net power absorbed by each circuit over a complete cycle. Explain your answer.
At a hydroelectric power plant, the water pressure head is at a height of 300 m and the water flow available is 100 m3 s–1. If the turbine generator efficiency is 60%, estimate the electric power available from the plant (g = 9.8 ms–2).
The series combination of R, L, C is connected to an a.c. source. If the resistance is 3 and the reactance is 4, the power factor of the circuit is:
In an AC. circuit, the current is :
i = `5 sin (100t - pi/2)` amp.
and the a.c. potentiol is:
V = 200 sin (100t) volt.
Then the power consumption is
A 100 Ω electric iron is connected to 200 V, 50 Hz ac source. Calculate average power delivered to iron, peak power and energy spent in one minute?
The coefficient of induction of a choke coil is 0.1 H and resistance is 12 Ω. If it is connected to an a.c source of frequency 60Hz. Then the power factor will be ______.
