Advertisements
Advertisements
प्रश्न
The length of a road roller is 2.1 m and its diameter is 1.4 m. For levelling a ground 500 rotations of the road roller were required. How much area of ground was levelled by the road roller? Find the cost of levelling at the rate of Rs. 7 per sq. m.
उत्तर
Radius of the road roller, r = `1.4/2` = 0.7 m
Length of the road roller, h = 2.1 m
∴ Area levelled by the road roller in one rotation = Curved surface area of the road roller
= 2πrh
= `2 xx 22/7 xx 0.7 xx 2.1`
= 9.24 m2
∴ Area levelled by the road roller in 500 rotations
= 500 × Area levelled by the road roller in one rotation
= 500 × 9.24
= 4620 m2
Rate of levelling the ground = Rs 7/m2
∴ Cost of levelling the ground
= Area of the ground levelled by the road roller × Rate of levelling the ground
= 4620 × 7
= Rs 32,340
Thus, the area of ground levelled by the road roller is 4620 m2 and the cost of levelling the ground is Rs 32,340.
APPEARS IN
संबंधित प्रश्न
The inner diameter of a circular well is 3.5 m. It is 10 m deep Find:
(i) inner curved surface area.
(ii) the cost of plastering this curved surface at the rate of Rs. `40 per m^2`
The sum of the radius of the base and height of a solid cylinder is 37 m. If the total surface area of the solid cylinder is 1628 m2, find the circumference of its base.
A well is dug 20 m deep and it has a diameter of 7 m. The earth which is so dug out is spread out on a rectangular plot 22 m long and 14 m broad. What is the height of the platform so formed?
Two circular cylinders of equal volumes have their heights in the ratio 1 : 2. Find the ratio of their radii.
A solid cylinder has a total surface area of 231 cm2. Its curved surface area is \[\frac{2}{3}\] of the total surface area. Find the volume of the cylinder.
A well with 10 m inside diameter is dug 8.4 m deep. Earth taken out of it is spread all around it to a width of 7.5 m to form an embankment. Find the height of the embankment.
Mark the correct alternative in each of the following:
In a cylinder, if radius is doubled and height is halved, curved surface area will be
Find the area of the sheet required to make a cylindrical container which is open at one side and whose diameter is 28 cm and height is 20 cm. Find the approximate area of the sheet required to make a lid of height 2 cm for this container.
The radius of the base of a right circular cylinder is doubled and the height is halved. What is the ratio of volume of the new cylinder to that of the original cylinder?
