Advertisements
Advertisements
प्रश्न
The variation of inductive reactance (XL) of an inductor with the frequency (f) of the ac source of 100 V and variable frequency is shown in fig.
(i) Calculate the self-inductance of the inductor.
(ii) When this inductor is used in series with a capacitor of unknown value and resistor of 10 Ω at 300 s–1, maximum power dissipation occurs in the circuit. Calculate the capacitance of the capacitor.
उत्तर
(i)
We know that `"X"_"L" = omega"L" and omega = 2pi"f"` where f is frequency in Hz.
So, `"L" = "X"_"L"/(2pif) = (20)/(2pi(100)) = (40)/(2pi(200)) = (60)/(2pi(300)) = 31.84 xx 10^-3 ≈ 32 "mH"`
(ii)
we know that power dissipation is maximum when `"X"_"L" = "X"_"C"`
or `omegaL = 1/(omegaC) or C = 1/(omega^2L`
⇒ `"C" = 1/(4pi^2"f"^2"L") = 1/(4xx3.14xx3.14xx300xx300xx32xx10^-3) = 8.8 mu"F"`
APPEARS IN
संबंधित प्रश्न
Three identical capacitors C1, C2 and C3 of capacitance 6 μF each are connected to a 12 V battery as shown.
Find
(i) charge on each capacitor
(ii) equivalent capacitance of the network
(iii) energy stored in the network of capacitors
A thin metal plate P is inserted between the plates of a parallel-plate capacitor of capacitance C in such a way that its edges touch the two plates . The capacitance now becomes _________ .
The capacitance of a capacitor does not depend on
A cylindrical capacitor is constructed using two coaxial cylinders of the same length 10 cm and of radii 2 mm and 4 mm. (a) Calculate the capacitance. (b) Another capacitor of the same length is constructed with cylinders of radii 4 mm and 8 mm. Calculate the capacitance.
Each capacitor shown in figure has a capacitance of 5⋅0 µF. The emf of the battery is 50 V. How much charge will flow through AB if the switch S is closed?
Obtain an expression for equivalent capacitance when three capacitors C1, C2 and C3 are connected in series.
The positive terminal of 12 V battery is connected to the ground. Then the negative terminal will be at ______.
Two plates A and B of a parallel plate capacitor are arranged in such a way, that the area of each plate is S = 5 × 10-3 m 2 and distance between them is d = 8.85 mm. Plate A has a positive charge q1 = 10-10 C and Plate B has charge q2 = + 2 × 10-10 C. Then the charge induced on the plate B due to the plate A be - (....... × 10-11 )C
A capacitor of capacity 2 µF is charged to a potential difference of 12 V. It is then connected across an inductor of inductance 0.6 mH. The current in the circuit at a time when the potential difference across the capacitor is 6.0 V is ______ × 10-1A.
