Advertisements
Advertisements
प्रश्न
Two wires of the same material and same length have radii 1 mm and 2 mm respectively. Compare their specific resistance.
उत्तर
`ρ_1 = ("R"_1 1/(pir_1^2))/l_1`
`ρ_2 = ("R"_2 1/(pir_2^2))/l_2` or
l1 = l2 and R1 = R2
∴ Ratio of resistivity = 1 : 1
APPEARS IN
संबंधित प्रश्न
Distinguish between the resistivity and conductivity of a conductor.
The resistivity does not change if ____________.
The resistivity of insulators is of the order of:
Three 2 Ω resistors, A, B and C, are connected as shown in Figure. Each of them dissipates energy and can withstand a maximum power of 18 W without melting. Find the maximum current that can flow through the three resistors?
Should the resistance of an ammeter be low or high? Give reason.
What is electrical resistivity of a material? What is its unit? Describe an experiment to study the factors on which the resistance of conducting wire depends.
Find the resistivity of the material of a metallic conductor of length 2 m and area of cross-section 1.4 × 10-6 m2. The resistance of the conductor is 0.04 ohm.
The specific resistance of a conductor depends on its ______.
Two copper wires can have the different ______ but will have same ______.
What length of copper wire of specific resistance 1.7 × 10-8 Ω m and radius 1 mm is required so that its resistance is 2 Ω?
