Advertisements
Advertisements
प्रश्न
Which two aberrations do objectives of refracting telescope suffer from? How are these overcome in reflecting telescope?
उत्तर
Refracting telescope suffer from chromatic and spherical aberrations.
Chromatic aberration: The image of a white object formed by a lens is coloured and blurred. This inability of lens to form a clear image is known as chromatic aberration.
Spherical aberration: The inability of a lens to form a point image of an axial point object is called spherical aberration.
In the reflecting-type telescope, the objective lens is replaced by the concave parabolic mirror of a large aperture required for observing fainter objects. The use of parabolic mirror makes the resolving power of the telescope high. The parabolic mirrors are free from chromatic and spherical aberrations.
APPEARS IN
संबंधित प्रश्न
Draw a labelled schematic ray diagram of astronomical telescope in normal adjustment.
How does the resolving power of a telescope change on increasing the aperture of the objective lens? Justify your answer.
Define refracting telescope magnifying power and write the expression for it ?
You are given following three lenses. Which two lenses will you use as an eyepiece and as an objective to construct an astronomical telescope?
|
Lens |
Power (P) |
Aperture (A) |
|
L1 |
3D |
8 cm |
|
L2 |
6D |
1 cm |
|
L3 |
10D |
1 cm |
The optical length of an astronomical telescope with magnifying power of ten for normal vision is 44 cm. what is the focal length of the object
The resolving power of a telescope whose lens has a diameter of 1.22 m for a wavelength of 5000° is
A doctor advise a patient to are spectating with a convex len of focal length 40 cm in constant with ·a concave lens of focal length 25 cm. What is the power of the combination?
If the refractive index of a material of equilateral prism is `sqrt(3)` then angle of minimum deviation of prism
If numerical aperture of a microscope is increased then it
The human eye has an approximate angular resolution of `phi` = 5.8 × 10–4 rad and typical photoprinter prints a minimum of 300 dpi (dots per inch, 1 inch = 2.54 cm). At what minimal distance z should a printed page be held so that one does not see the individual dots.
