Advertisements
Advertisements
प्रश्न
A fixed pulley is driven by a 100 kg mass falling at a rate of 8.0 m in 4.0 s. It lifts a load of 75.0 kgf. Calculate : the height to which the load is raised in 4.0 s.
उत्तर
Ratio of `(M.A.)/(V.R) = "Efficiency"`
`("Load"/"Effort")/("distance moved by effort"/"distance moved by load") = 3/4`
`(75/100)/(8/d_L) =3/4`
`75/100 xx d_L/8 = 3/4`
`3/32 d_L = 3/4`
`d_L = 3/4 xx 32/3 = 8 m`
The height to which the load is raised is 8 m.
APPEARS IN
संबंधित प्रश्न
A boy has to lift a load of mass 50 kg to a height of 1 m. (a) what effort is required if he lifts it directly? Take g = 10 N kg-1 (b) If the boy can exert a maximum effort of 250 N, so he uses an inclined plane to lift the load up. What should be the minimum length of the plank used by him?
A block and tackle system has 5 pulleys. If an effort 0f 1000 N is needed in the downward direction to raise a load of 4500 N, calculate:
- the mechanical advantage
- the velocity ratio, and
- the efficiency of the system.
In following figure, shows a system of four pulleys, The upper two pulleys are fixed and the lower two are movable.
- Draw a string around the pulleys. Also show the place and direction in which the effort if applied.
- What is the velocity ratio of the system?
- How are load and effort of the pulley system related?
- What assumption do you make in arriving at your answer in part (c)?
You are given four pulleys and three strings. Draw a neat and labelled diagram to use them so as to obtain a maximum mechanical advantage equal to 8. In you diagram make the directions of load, effort and tension in each strand. What assumptions have you made to obtain the required mechanical advantage?
Complete the following sentences:
1 J = ........ Erg.
A pair of nut crackers is 12 cm long. An effort of 10 gf is required to crack a nut which is passed at a point 3 cm from the finger. Calculate the load Fig.
A block and tackle system has the velocity ratio 3. Draw a labelled diagram of the system indicating the points of application and the directions of load L and effort E. A man can exert a pull of 200 kgf. If the effort end moves a distance 60 cm, what distance does the load move?
The mechanical advantage of a machine is 5 and its efficiency is 80%. It is used to lift a load of 200 kgf to a height of 20 m. Calculate:
(i) The effort required, and
(ii) The work done on the machine (g = 10 ms−2).
A pulley system has a velocity ratio 3. Draw a diagram showing the point of application and direction of load (L), effort (E) and tension (T). It lifts a load of 150 N by an effort of 60 N. Calculate its mechanical advantage. Is the pulley system ideal? Give reason.
