Advertisements
Advertisements
प्रश्न
Define the term resistivity and state its S.I unit.
उत्तर
The resistivity of a material is the resistance of a wire of that material of unit length and unit
area of cross-section.
Its S.I. unit is ohm metre.
APPEARS IN
संबंधित प्रश्न
The work done in moving a unit charge across two points in an electric circuit is a measure of:
(a) current
(b) potential difference
(c) resistance
(d) power
What is an electric current?
<p> Define the unit of electric current (or Define ampere).
Ten bulbs are connected in a series circuit to a power supply line. Ten identical bulbs are connected in a parallel circuit to an identical power supply line.
(c) In which circuit, if one bulb blows out, all other will stop glowing?
Calculate the effective resistance between the points A and B in the network shown below in Figure 8.45
Tick(✓) the correct choice in the following:
When the length of a conductor is doubled the resistance of the conductor
will
A wire is passed through a piece of cardboard as shown in fig .. An electric current flows vertically down the wire and then flows back up. The two sections of the write are observed to repel each other.
(a) Wi th the aid of a diagram, describe how you would plot the magnetic field lines on the card .
(b) Sketch the magnetic field patterns around both the sections of the wire. Use your sketch to explain why the two sections repel each other.
(c) The repulsive force between the two sections is small. What changes could be made to increase it?
Fig . shows the core of a transformer and i ts input and output connections
State the material used for the core and describe th e structure of the core.
(a) Use the values given in the diagram to calculate the turns ratio for the transformer and connections, labeling all parts of the diagram .
(b) If a current of 2 A is taken from th e output, calculate th e current in the input circuit (Assume the transformer to be ideal ).
Coulomb is the SI unit of ____________.
