Advertisements
Advertisements
प्रश्न
The length, breadth, and thickness of a rectangular sheet of metal are 4.234 m, 1.005 m, and 2.01 cm respectively. Give the area and volume of the sheet to correct significant figures.
उत्तर
Length of sheet, l = 4.234 m
Breadth of sheet, b = 1.005 m
Thickness of sheet, h = 2.01 cm = 0.0201 m
The given table lists the respective significant figures:
| Quantity | Number | Significant Figure |
| l | 4.234 | 4 |
| b | 1.005 | 4 |
| h | 0.0201 | 3 |
Hence, area and volume both must have least significant figures, i.e., 3.
Surface area of the sheet = 2 (l × b + b × h + h × l)
= 2 (4.234 × 1.005 + 1.005 × 0.0201 + 0.0201 × 4.234)
= 2 (4.25517 + 0.0202005 + 0.0851034)
= 2 × 4.36
= 8.72 m2
Volume of the sheet = l × b × h
= 4.234 × 1.005 × 0.0201
= 0.085528917 m3
After rounding off = 0.0855 m3
This number has only 3 significant figures, i.e., 8, 5, and 5.
APPEARS IN
संबंधित प्रश्न
What do you mean by significant figures?
How many significant figures are present in the 5005?
Round up the following upto three significant figures:
34.216
Round up the following upto three significant figures:
10.4107
Round up the following upto three significant figures:
2808
How many significant figures should be present in the answer of the following calculation:-
`(0.02856 xx 298.15 xx 0.112)/0.5785`
How many significant figures should be present in the answer of the following calculation?
5 × 5.364
How many significant figures should be present in the answer of the following calculation?
0.0125 + 0.7864 + 0.0215
A screw gauge has a pitch of 1.0 mm and 200 divisions on the circular scale. Do you think it is possible to increase the accuracy of the screw gauge arbitrarily by increasing the number of divisions on the circular scale?
The mean diameter of a thin brass rod is to be measured by vernier callipers. Why is a set of 100 measurements of the diameter expected to yield a more reliable estimate than a set of 5 measurements only?
The photograph of a house occupies an area of 1.75 cm2on a 35 mm slide. The slide is projected on to a screen, and the area of the house on the screen is 1.55 m2. What is the linear magnification of the projector-screen arrangement?
The mass of a box measured by a grocer’s balance is 2.300 kg. Two gold pieces of masses 20.15 g and 20.17 g are added to the box. What is
- What is the total mass of the box?
- What is the difference in the masses of the pieces to correct significant figures?
A man walking briskly in rain with speed v must slant his umbrella forward making an angle θ with the vertical. A student derives the following relation between θ and v: tan θ = v and checks that the relation has a correct limit: as v →0, θ → 0, as expected. (We are assuming there is no strong wind and that the rain falls vertically for a stationary man). Do you think this relation can be correct? If not, guess the correct relation.
A LASER is a source of very intense, monochromatic, and unidirectional beam of light. These properties of a laser light can be exploited to measure long distances. The distance of the Moon from the Earth has been already determined very precisely using a laser as a source of light. A laser light beamed at the Moon takes 2.56 s to return after reflection at the Moon’s surface. How much is the radius of the lunar orbit around the Earth?
State the number of significant figures in the following:
0.2370 g cm–3
State the number of significant figures in the following:
6.320 J
State the number of significant figures in the following:
0.0006032 m2
Answer the following question.
Describe what is meant by significant figures.
Solve the numerical example.
A large ball 2 m in radius is made up of a rope of square cross-section with edge length 4 mm. Neglecting the air gaps in the ball, what is the total length of the rope to the nearest order of magnitude?
Solve the numerical example.
Nuclear radius R has a dependence on the mass number (A) as R =1.3 × 10-16 A1/3 m. For a nucleus of mass number A = 125, obtain the order of magnitude of R expressed in the meter.
Solve the numerical example.
The diameter of a sphere is 2.14 cm. Calculate the volume of the sphere to the correct number of significant figures.
Answer the following question.
Describe what is meant by order of magnitude.
Write the rules for determining significant figures.
How many significant figures should be present in the answer of the following calculations?
`(2.5 xx 1.25 xx 3.5)/2.01`
Assertion (A): Significant figures for 0.200 is 3 where as for 200 it is 1.
Reason (R): Zero at the end or right of a number are significant provided they are not on the right side of the decimal point.
If the density of a solution is 3.12 g mL–1, the mass of 1.5 mL solution in significant figures is ______.
The sum of the numbers 436.32, 227.2 and 0.301 in appropriate significant figures is ______.
The mass and volume of a body are 4.237 g and 2.5 cm3, respectively. The density of the material of the body in correct significant figures is ______.
The length and breadth of a rectangular sheet are 16.2 cm and 10.1cm, respectively. The area of the sheet in appropriate significant figures and error is ______.
Why do we have different units for the same physical quantity?
Calculate the length of the arc of a circle of radius 31.0 cm which subtends an angle of `pi/6` at the centre.
Using the rules for significant figures, the correct answer for the expression `(0.02858 xx 0.112)/(0.5702)` will be ______.
