Advertisements
Advertisements
प्रश्न
Why do electricians wear rubber hand gloves while working with electricity?
उत्तर
Electricians wear rubber hand gloves while working with electricity because rubber is an insulator and it will prevent them from getting electric shock, in case of short circuit or overloading.
APPEARS IN
संबंधित प्रश्न
If a potential difference of 10 V causes a current of 2 A to flow for 1 minute, how much energy is transferred?
The p.d. across a lamp is 12 V. How many joules of electrical energy are changed into heat and light when:
a charge of 5 C passes through it?
Define the term ‘volt’.
Water in the waterfall flows from a higher level to the lower level because of ____________.
The voltage across a 3Ω resistance is 6 V. How large is the current? What is
the resistance of a filament lamp when a voltage of 3 V across it causes a
current of 0.5 A?
A V-I graph for a nichrome wire is given below. What do you infer from this graph? Draw a labelled circuit diagram to obtain such a graph.
Three resistors are connected to a 12 V battery as shown in the figure given below:
(i) What is the current through the 8 ohm resistor?
(ii) What is the potential difference across the parallel combination of 6 ohm and 12 ohm resistor?
(iii) What is the current through the 6 ohm resistor?
Suppose there are three resistors A, B, and C having resistances r1, r2, and r3 respectively. If R represents their equivalent resistance, establish the following relation `1/"R" = 1/"r"_1 + 1/"r"_2 + 1/"r"_3`, when joined in parallel.
A 10 m long wire of a particular material is of resistance 5Ω What will be the resistance of 10m long wire of the same material but the double radius.
An electric charge always flows from a point at a ______ to a point at a ______.
