Advertisements
Advertisements
प्रश्न
Would the bulb glow after completing the circuit shown in Figure if instead of a safety pin we use an eraser?
उत्तर
Erasers are bad conductors of electricity. They do not conduct electricity. The circuit becomes an open circuit. Hence, the bulb will not glow if a safety pin is replaced with an eraser.
APPEARS IN
संबंधित प्रश्न
The following diagram shows three lamps and three switches 1, 2 and 3 connected with two cells.
- Name the switch / switches to be closed so as to light all the three lamps.
- How are the lamps connected: in series or in parallel?
The diagram below shows a dual control switch circuit connected to a bulb.
(i) Copy the diagram and complete it so that the bulb is switched ON.
(ii) Out of A and B which one is the live wire and which one is the neutral wire ?
How should the electric lamps in a house be connected so that the switching ON or OFF in a room has no effect on other lamps in the same building?
What is a switch? State its function in an electric circuit.
What are ‘dual switches’? Mention their one main use.
Why should switches always be connected to the live wire? Give one precaution that should be taken while handling switches.
Complete the drawing shown in Figure to indicate where the free ends of the two wires should be joined to make the bulb glow.
Name the component of a circuit which help us to start or stop the appliances & safely and easily.
Name the component which connects electrical components to one another.
You are provided with a bulb, a cell, a switch and some connecting wires. Draw a diagram to show the connections between them to make the bulb glow.
