Advertisements
Advertisements
प्रश्न
A cylindrical pillar is 50 cm in diameter and 3.5 m in height. Find the cost of painting the curved surface of the pillar at the rate of 12.50 per `m^2`.
उत्तर
Given that
Height of the pillar = 3.5m
Radius of the circular end of the pillar=`50/2`cm
=25cm=0.25m
Curved surface area of pillar = 2πrh
=2 ×`22/7× 0.25 × 3.5m^2`
`=5.5m^2`
Cost of painting 21m area – Rs 12.50
Cost of painting `5.5m^2 area Rs.(5.5 × 12.50)
=Rs. 68.75.
Thus, the cost of painting the CSA pillar is Rs. 68,75
APPEARS IN
संबंधित प्रश्न
The total surface area of a hollow cylinder which is open from both sides is 4620 sq. cm,area of base ring is 115.5 sq. cm and height 7 cm. Find the thickness of the cylinder
The curved surface area of a cylinder is 1320 cm2 and its base has diameter 21 cm. Find the height of the cylinder.
Find the volume of a cylinder whose r = 2.8 m, h = 15 m .
The volume and the curved surface area of a cylinder are 1650 cm3 and 660 cm2respectively. Find the radius and height of the cylinder.
The curved surface area of a cylindrical pillar is 264 m2 and its volume is 924 m3. Find the diameter and the height of the pillar.
A cylindrical container with diameter of base 56 cm contains sufficient water to submerge a rectangular solid of iron with dimensions 32 cm × 22 cm × 14 cm. Find the rise in the level of the water when the solid is completely submerged.
The radii of two cylinders are in the ratio 2 : 3 and their heights are in the ratio 5 : 3. Calculate the ratio of their volumes and the ratio of their curved surfaces.
A well with 14 m diameter is dug 8 m deep. The earth taken out of it has been evenly spread all around it to a width of 21 m to form an embankment. Find the height of the embankment.
A road roller is cylindrical in shape, its circular end has a diameter of 1.4 m and its width is 4 m. It is used to level a play ground measuring 70 m × 40 m. Find the minimum number of complete revolutions that the roller must take in order to cover the entire ground once.
In the example given below, the radius of the base of a cylinder and its height is given. Then find the curved surface area and total surface area.
r = 2.5 cm, h = 7 cm
