Advertisements
Advertisements
प्रश्न
The total surface area of a hollow cylinder which is open from both sides is 4620 sq. cm,area of base ring is 115.5 sq. cm and height 7 cm. Find the thickness of the cylinder
उत्तर
Let the inner radii of hollow cylinder rcm
Outer radii of hollow cylinder Rcm
Then,
`2πrh + 2πRh +2πR^2 - 2πr^2 = 4620 → (1)`
`πR^2 =πr^2 =115.5→(2)`
`⇒ 2πh(R+r)+2(πR^2-πr^2)=4620 and πR^2-m^2 = 115.5`
`⇒2πh(R+r)+231=4620 and π(R^2-r^2)=115.5`
`⇒2π× 7(r+R)=4389 and π(R^2-r^2)=115.5`
`⇒π (R+r)=313.5 and π (R+r) (R-r)=115.5`
`⇒(π(R+r)(R-r))/(π(R+r))=115.5/313.5`
`⇒ R-r=7/19cm`.
APPEARS IN
संबंधित प्रश्न
It is required to make a closed cylindrical tank of height 1 m and base diameter 140 cm from a metal sheet. How many square meters of the sheet are required for the same?
The inner diameter of a circular well is 3.5 m. It is 10 m deep Find:
(i) inner curved surface area.
(ii) the cost of plastering this curved surface at the rate of Rs. `40 per m^2`
The circumference of the base of a cylinder is 88 cm and its height is 15 cm. Find its curved surface area and total surface area.
A rectangular sheet of paper, 44 cm × 20 cm, is rolled along its length to form a cylinder. Find the total surface area of the cylinder thus generated.
The curved surface area of a cylinder is 1320 cm2 and its base has diameter 21 cm. Find the height of the cylinder.
The height of a right circular cylinder is 10.5 m. Three times the sum of the areas of its two circular faces is twice the area of the curved surface. Find the volume of the cylinder.
The curved surface area of a cylinder is 1320 cm2 and its base had diameter 21 cm. Find the height and the volume of the cylinder.
The height of sand in a cylindrical shaped can drops 3 inches when 1 cubic foot of sand is poured out. What is the diameter, in inches, of the cylinder?
A road roller is cylindrical in shape, its circular end has a diameter of 1.4 m and its width is 4 m. It is used to level a play ground measuring 70 m × 40 m. Find the minimum number of complete revolutions that the roller must take in order to cover the entire ground once.
The radius of a solid cylinder decreases by 10% and its height increases by 20%. Find the change in percentage of its volume and curved surface area