हिंदी

A Light Bulb and a Solenoid Are Connected in Series Across an Ac Source of Voltage. Explain, How the Glow of the Light Bulb Will Be Affected When an Iron Rod is Inserted in the Solenoid. - Physics

Advertisements
Advertisements

प्रश्न

A light bulb and a solenoid are connected in series across an ac source of voltage. Explain, how the glow of the light bulb will be affected when an iron rod is inserted in the solenoid.

उत्तर

When the iron rod is inserted, the magnetic field inside the solenoid is increased. This increases the inductance of the solenoid. So the inductive reactance of the solenoid increases.
Consequently, a large fraction of the applied AC voltage appears across the solenoid. As a result of this, there is a less voltage across the bulb and the brightness of the bulb decreases.

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
2016-2017 (March) Foreign Set 3

वीडियो ट्यूटोरियलVIEW ALL [2]

संबंधित प्रश्न

You are given three circuit elements X, Y and Z. When the element X is connected across an a.c. source of a given voltage, the current and the voltage are in the same phase. When the element Y is connected in series with X across the source, voltage is ahead of the current in phase by π/4 . But the current is ahead of the voltage in phase by π/4when Z is connected in series with X across the source. Identify the circuit elements X, Y and Z. When all the three elements are connected in series across the same source, determine the impedance of the circuit.Draw a plot of the current versus the frequency of applied source and mention the significance of this plot.


A capacitor of capacitance 0.5 μF is connected to a source of alternating e.m.f. of frequency 100 Hz. What is the capacitive reactance? (Π = 3.142)


A light bulb is rated at 120 W for a 220 V a.c. supply. Calculate the resistance of the bulb.


A light bulb is rated at 125 W for a 250 V a.c. supply. Calculate the resistance of the bulb.


A light bulb is rated 100 W for 220 V ac supply of 50 Hz. Calculate

(i) The resistance of the bulb;

(ii) The rms current through the bulb.


(i) An alternating emf of 200 V, 50 Hz is applied to an L-R ciruit, having a resistance R of 10 Ω and an  inductance L of 0.05H connected in series. Calculate : 

(1) Impedance

(2) Current flowing in the circuit 

(ii) Draw a labelled graph showing the variation of inductive reactance (`X_L`) verses frequency (`f`) .


A coil having self-inductance of 0.7 H and resistance of 165 Ω is connected to an a.c. source of 

275V,50Hz. If π = `22/7`

Calculate:
(i) Reactance of the coil
(ii) Impedance of the coil ‘
(iii) Current flowing through the coil 


A series combination of an inductor (L), capacitor (C) and a resistor (R) is connected across an ac source of emf of peak value E0, and angular frequency (ω). Plot a graph to show variation of impedance of the circuit with angular frequency (ω).


An inductance L having a resistance R is connected to an alternating source of angular frequency ω The Quality factor Q of inductance is ______.

Which of the following graphs represents the correct variation of inductive reactance XL with frequency u?


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×