Advertisements
Advertisements
प्रश्न
A rectangular loop ABCD carrying a current I is situated near a straight conductor XY, such that the conductor is parallel to the side AB of the loop and is in the plane of the loop. If a steady current I is established in the conductor as shown, the conductor XY will ______.
विकल्प
remain stationary
move towards the side AB of the loop
move away from the side AB
rotate about its axis
उत्तर
A rectangular loop ABCD carrying a current I is situated near a straight conductor XY, such that the conductor is parallel to the side AB of the loop and is in the plane of the loop. If a steady current I is established in the conductor as shown, the conductor XY will move towards the side AB of the loop.
APPEARS IN
संबंधित प्रश्न
The magnetic effect of current was discovered by:
(a) Maxwell
(b) Fleming
(c) Oersted
(d) Faraday
The north pole of a long bar magnet was pushed slowly into a short solenoid connected to a galvanometer. The magnet was held stationary for a few seconds with the north pole in the middle of the solenoid and then withdrawn rapidly. The maximum deflection of the galvanometer was observed when the magnet was ______.
If fuse of 250 mA, 500 mA, 1 A, 5 A and 10 A were available, which one would be the most suitable for protecting an amplifier rated at 240 V, 180 W?
How should the electric lamps in a building be connected so that the switching on or off in a room has no effect on other lamps in the same building?
In the Activity shown below, how do we think the displacement of rod AB will be affected if
- current in rod AB is increased
- a stronger horse-shoe magnet is used
- length of the rod AB is increased?
|
(ii) Global warming is a desirable aspect of the intensified greenhouse effect.
Explain the magnetic field created around a straight current carrying conductor with the help of a diagram.
In the arrangement shown in Figure there are two coils wound on a non-conducting cylindrical rod. Initially the key is not inserted. Then the key is inserted and later removed. Then
A magnetic compass shows a deflection when placed near a current carrying wire. How will the deflection of the compass get affected if the current in the wire is increased? Support your answer with a reason.
Using an electromagnet, you can make a working model of a railway signal as shown in figure.
