Advertisements
Advertisements
प्रश्न
Calculate the volume of 320g of SO2 at STP .
(Atomic mass : S = 32 and O = 16)
उत्तर
Atomic mass : S = 32 and O = 16
Molecular mass of SO2 = 32 + (2 × 16) = 64g
As 64g of SO2 = 22.4dm3.
Then, 320g of SO2 = `[320 xx 22.4]/64` = 112L
APPEARS IN
संबंधित प्रश्न
Copper sulphate solution reacts with sodium hydroxide solution to form a precipitate of copper hydroxide according to the equation :
2NaOH + CuSO4 → Na2SO4 + Cu (OH)2 ↓
(i) What mass of copper hydroxide is precipitated by using 200 gm of sodium hydroxide?
[H = 1, O = 16, Na = 23, S = 32, Cu = 64]
(ii) What is the colour of the precipitate formed?
A gas cylinder contains 24 × 1024 molecules of nitrogen gas. If Avogadro's number is 6 × 1023 and the relative atomic mass of nitrogen is 14, calculate the volume of nitrogen at STP in dm3.
Oxygen oxidase ethyne to carbon dioxide and water as shown by the equation :
2C2H2 + 5O2 → 4CO2 + 2H2O
What volume of ethylene gas at STP is required to produce 8.4 dm3 of carbon dioxide at STP?
What volume of hydrogen and oxygen measured at S.T.P. will be required to prepare 1.8 g of water?
Hydrogen sulphide gas burns in oxygen to yield 12.8 g of sulphur dioxide gas as under:
\[\ce{2H2S + 3O2 -> 2H2O + 2SO2}\]
Calculate the volume of hydrogen sulphide at STP. Also, calculate the volume of oxygen required at STP which will complete the combustion of hydrogen sulphide determined in litres.
A cylinder of 20 liters capacity contains gas at 100 atmospheric pressure. How many flasks of 200 cm3capacity can be filled from it at 1-atmosphere pressure, temperature remaining constant?
A gas is to be filled from a tank of capacity 10,000 litres into cylinders each having capacity of 10 litres. The condition of the gas in the tank is as follows:
- The pressure inside the tank is 800 mm of Hg.
- The temperature inside the tank is −3°C.
When the cylinder is filled, the pressure gauge reads 400 mm of Hg and the temperature is 270 K. Find the number of cylinders required to fill the gas.
Write the value of:
the standard temperature in:
(i) °C
(ii) K
Correct the following statement:
The standard temperature is 25°C.
The following experiment was performed in order to determine the formula of a hydrocarbon. The hydrocarbon X is purified by fractional distillation.
0.145 g of X was heated with dry copper (II) oxide and 224 cm3 of carbon dioxide was collected at STP.
What was the purpose of Copper (II) oxide?
