Advertisements
Advertisements
प्रश्न
Consider the situation of the previous problem. Let the water push the left wall by a force F1 and the right wall by a force F2.
विकल्प
F1 = F2
F1 > F2
F1 < F2
the information is insufficient to know the relation between F1 and F2
उत्तर
F1 > F2
When the box is accelerated towards right, the water in the box experiences a pseudo force (ma) towards left, where m is the mass of water. So, the force F1 exerted by the water on the the left wall of the box is greater.
APPEARS IN
संबंधित प्रश्न
Toricelli’s barometer used mercury. Pascal duplicated it using French wine of density 984 kg m–3. Determine the height of the wine column for normal atmospheric pressure.
Two vessels have the same base area but different shapes. The first vessel takes twice the volume of water that the second vessel requires to fill up to a particular common height. Is the force exerted by the water on the base of the vessel the same in the two cases? If so, why do the vessels filled with water to that same height give different readings on a weighing scale?
A plane is in level flight at a constant speed and each of its two wings has an area of 25 m2. If the speed of the air is 180 km/h over the lower wing and 234 km/h over the upper wing surface, determine the plane’s mass. (Take air density to be 1 kg m–3).
It is easier to hammer a blunt nail into a piece of wood than a sharply pointed nail.
The feet of lizards act like
State the unit of thrust
A gum bottle rests on its base. If it is placed upside down, how does the thrust change?
Find the area of a body which experiences a pressure of 50000 Pa by a thrust of 100 N?
The base of a container measures 15 cm × 20 cm. It is placed on a table top. If the weight of the container is 60 N, what is the pressure exerted by the container on the table top?
If someone presses a pointed needle against your skin, you are hurt. But if someone presses a rod against your skin with the same force, you easily tolerate. Explain.
Multiple Choice Question.
A hydraulic lift is designed to lift heavy objects of maximum mass 2000 kg. The area of cross-section of piston carrying the load is 2.25 × 10-2 m2. What is the maximum pressure the smaller piston would have to bear?
In a hydraulic lift, the input piston had surface area 30 cm2 and the output piston has surface area of 1500 cm2. If a force of 25 N is applied to the input piston, calculate weight/force on output piston.
A brick is kept in three different ways on a table as shown in figure. The pressure exerted by the brick on the table will be
 |
 |
 |
| (A) | (B) | (C) |
The total force exerted by a body normal to the surface is called ______.
If the same force is made to act on a larger area, the pressure ______.
What is thrust?
Cooking in a place located at a higher altitude is difficult. Why?
Why dams are made stronger and thicker at the bottom than at the top?
Upthrust = weight of the fluid displaced – apparent weight of the object.
The force exerted by liquid perpendicular to the surface of the body is equal to the product of ______ at that point.
