Advertisements
Advertisements
प्रश्न
Distinguish between ‘Analog’ and ‘Digital’ forms of communication.
उत्तर
Analog form of communication | Digital form of communication |
It makes use of analog signals whose amplitude varies continuously with time. |
It makes use of digital signals whose amplitude is of two levels, either low or high. |
The retrieved message in analog communication is not an exact copy of the original message. This is because the message suffers distortions over the medium and during its detection process and is distorted. |
The retrieved message in digital communication is always the exact copy of the original message and is practically free of distortion.
|
It can broadcast only limited number of channels simultaneously. |
It can broadcast tremendously large number of channels simultaneously. |
APPEARS IN
संबंधित प्रश्न
Ionosphere mainly consists of _______.
What are the three basic units in communication systems ? Write briefly the function of each of these.
The figure given below shows the block diagram of a generalized communication system. Identify the element labelled 'X' and write its function.
For efficient radiation and reception of signal with wavelength λ, the transmitting antennas would have length comparable to ______.
(A)`lambda` of frequency used
(B)`lambda/2` of frequency used
(C )`lambda/3` of frequency used
(D)`lambda/4` of frequency used
Draw the block diagram of a receiver in communication system
Explain the basic concept of mobile telephoning.
Answer the following question :
Write the functions of transducer and repeater ?
Name the type of waves which are used for line of sight (LOS) communication. What is the range of their frequencies?
A transmitting antenna at the tope of a tower has a height of 20 m and the height of the receiving antenna is 45 m. Calculate the maximum distance between them for satisfactory communication in LOS mode. (Radius of the Earth = 6.4 × 106 m)
Explain the function of a repeater in a communication system.
Explain the terms (a) Transducer and (b) Attenuation in communication system.