Advertisements
Advertisements
प्रश्न
Find the total surface area and whose height is 15 cm and the radius of the base is 7 cm.
उत्तर
\[ \text{ Given: } \]
\[\text{ Height, h = 15 cm } \]
\[ \text{ Radius, r = 7 cm } \]
\[\text{ Total surface area, } S_2 = 2\pi r\left( r + h \right)\]
\[ = 2 \times \frac{22}{7} \times 7 \times \left( 7 + 15 \right)\]
\[ = 44 \times 22\]
\[ = 968 {\text{ cm } }^2 \]
APPEARS IN
संबंधित प्रश्न
A metal pipe is 77 cm long. The inner diameter of a cross section is 4 cm, the outer diameter being 4.4 cm.(See the given figure)
(i) inner curved surface area,
(ii) outer curved surface area,
(iii) total surface area.
`["Assume "pi=22/7]`
Find
The lateral or curved surface area of a closed cylindrical petrol storage tank that is 4.2 m in diameter and 4.5 m high.
`["Assume "pi=22/7]`
The area of the base of a right circular cylinder is 616 cm2 and its height is 25 cm. Find the volume of the cylinder.
A rectangular sheet of paper, 44 cm × 20 cm, is rolled along its length to form a cylinder. Find the volume of the cylinder so formed.
A well is dug 20 m deep and it has a diameter of 7 m. The earth which is so dug out is spread out on a rectangular plot 22 m long and 14 m broad. What is the height of the platform so formed?
A rectangular sheet of paper 30 cm × 18 cm can be transformed into the curved surface of a right circular cylinder in two ways i.e., either by rolling the paper along its length or by rolling it along its breadth. Find the ratio of the volumes of the two cylinders thus formed.
The ratio between the radius of the base and the height of a cylinder is 2 : 3. find the total surface area of the cylinder, it its volume is 1617 cm3.
The curved surface area of a cylindrical pillar is 264 m2 and its volume is 924 m3. Find the diameter and the height of the pillar.
Find the cost of sinking a tubewell 280 m deep, having diameter 3 m at the rate of Rs 3.60 per cubic metre. Find also the cost of cementing its inner curved surface at Rs 2.50 per square metre.
In the example given below, the radius of the base of a cylinder and its height is given. Then find the curved surface area and total surface area.
r = 70 cm, h = 1.4 cm
