Advertisements
Advertisements
प्रश्न
Show with the aid of a diagram how a wire is wound on a U-shaped piece of soft iron in order to make it an electromagnet. Complete the circuit diagram and label the poles of the electromagnet.
उत्तर
End A turns into an S-pole and End B into an N-pole. A pair of limbs wind in the opposite direction.
APPEARS IN
संबंधित प्रश्न
Why is soft iron used as the core of the electromagnet in an electric bell?
The incomplete diagram of an electric bell is given in Figure. Draw winding of coil on the core and complete the electric circuit in the diagram.
G-Gong, H-Hammer, A-Armature, C-Core, B-Battery.
The strength of the electromagnet can be increased by
Name the material used for preparing an electromagnet.
The following figure shows a coil wound around a soft iron bar XY.
- State the polarity at the ends X and Y as the switch is pressed.
- Suggest one way of increasing the strength of electromagnet so formed.
Name one device that uses an electromagnet.
State two advantages of an electromagnet over a permanent magnet.
State two differences between an electromagnet and a permanent magnet.
How is the working of an electric bell affected, if alternating current be used instead of direct current?
Explain in detail the application of electromagnets.
Unlike magnetic poles ______ whereas like poles ______.
Assertion (A): When 2 long parallel wires, hanging freely are connected in parallel to a battery, they come closer to each other.
Reason (R): Wires carrying current in opposite directions repel each other.
Explain the working of the following device.
Magnetic levitation trains.
