Advertisements
Advertisements
प्रश्न
Study the three electric circuits below. Each of them has a glass rod (G), a steel rod (S), and a wooden rod (W).
In which of the electric circuits would the bulb not light up.
विकल्प
A only
C only
A and B only
A , B and C
उत्तर
A and B only
APPEARS IN
संबंधित प्रश्न
What do the following symbols mean in circuit diagrams?
Draw circuit symbols for
fixed resistance
Draw circuit symbols for
an open switch
In an electric circuit, a battery and a bulb have been connected and the battery consists of two cells of equal potential difference. If the bulb is not glowing, then which tests will you perform in order to find out the reason for the bulb not glowing?
The switch is used to close or open an electric circuit.
In the circuit shown, which switches (L,M or N) must be closed to light up the bulb?
Which of the following a simple circuit must-have?
Draw a circuit diagram of an electric circuit containing a cell, a key, an ammeter, a resistor of 2Ω in series with a combination of two resistors (4Ω each) in parallel and a voltmeter across the parallel combination. Will the potential difference across the 2Ω resistor be the same as that across the parallel combination of 4Ω resistors? Give reason.
Set up the circuit shown in Figure again. Move the key to ‘ON’ position and watch carefully in which direction the compass needle gets deflected. Switch ‘OFF’ the current. Now keeping rest of the circuit intact, reverse the connections at the terminal of the cell. Again switch ‘on’ the current. Note the direction in which the needle gets deflected. Think of an explanation.
