Advertisements
Advertisements
प्रश्न
Sulphuric acid is manufactured by the contact process.
Give the conditions for the oxidation of \[\ce{SO2}\]
उत्तर
- The optimum temperature should be as low as possible. The yield has been found to be maximum at about 410°C-450°C.
- High pressure (2 atm) is favoured because the product formed has less volume than the reactant.
- Excess oxygen increases the production of sulphur trioxide.
- Vanadium pentoxide, or platinised asbestos, is used as a catalyst.
- Concentration of Reactants.
- A pure and dry mixture of two parts of \[\ce{SO2}\] and one part of \[\ce{O2}\] by vol. is used.
APPEARS IN
संबंधित प्रश्न
Sulphuric acid is manufactured by the contact process.
Give two balanced equations to obtain \[\ce{SO2}\] in this process.
Sulphuric acid is manufactured by contact process.
why is Sulphuric acid not obtained directly by reacting SO3 with water.
What property of conc. \[\ce{H2SO4}\] is made use of the following case? Give an equation for the reaction on the same:
In the production of \[\ce{HCl}\] gas when it reacts with chloride.
What property of conc. \[\ce{H2SO4}\] is made use of the following case? Give an equation for the reaction on the same:
In the preparation of sulphur dioxide by warming a mixture of conc. sulphuric acid and copper–turnings.
Define the following term:
Constant boiling mixture
Name the following:
The catalyst used in the constant process.
Choose the current answer from the options given below :
In the contact process, the impurities of arsenic are removed by
Name the two gases that are combined during the contact process.
With the help of equations, give an outline for the manufacture of sulphuric acid by the contact process.
The catalyst preferred in the conversion of Sulphur dioxide to Sulphur trioxide is ______.
