Advertisements
Advertisements
प्रश्न
The dimensions of emissive power are
विकल्प
[M1 L-2 T-3 ]
[M1 L2 T-3 ]
[M1 L0 T-3 ]
[M1 L0 T-2 ]
उत्तर
(C) [M1 L0 T-3 ]
APPEARS IN
संबंधित प्रश्न
Define emissive power and coefficient of emmision of a body.
A metal sphere cools at the rate of 4°C / min. when its temperature is 50°C. Find its rate of cooling at 45°C if the temperature of surroundings is 25°C.
Two copper spheres of radii 6 cm and 12 cm respectively are suspended in an evacuated enclosure. Each of them are at a temperature 15°C above the surroundings. The ratio of their rate of loss of heat is.................
- 2:1
- 1:4
- 1:8
- 8:1
A pinhole is made in a hollow sphere of radius 5 cm whose inner wall is at temperature 727oC. Find the power radiated per unit area. [Stefan’s constant σ = 5.7 x 10-8 J/m2 s K4 , emissivity (e) = 0.2]
Compute the temperature at which the r.m.s. speed of nitrogen molecules is 832 m/s. [Universal gas constant, R = 8320 J/k mole K, molecular weight of nitrogen = 28.]
The susceptibility of magnesium at 300 K is 2.4 x 10-5. At what temperature will the susceptibility increase to 3.6 x 10-5?
Answer the following:
There were two fixed points in the original Celsius scale as mentioned above which were assigned the number 0 °C and 100 °C respectively. On the absolute scale, one of the fixed points is the triple-point of water, which on the Kelvin absolute scale is assigned the number 273.16 K. What is the other fixed point on this (Kelvin) scale?
1000 tiny mercury droplets coalesce to form a bigger drop. In this process, temperature of the drop _______ .
(A) increases
(B) may increase or decrease
(C) decreases
(D) does not change
Does the temperature of a body depend on the frame from which it is observed?
Which of the curves in the following figure represents the relation between Celsius and Fahrenheit temperatures?
A spinning wheel A is brought in contact with another wheel B, initially at rest. Because of the friction at contact, the second wheel also starts spinning. Which of the following energies of the wheel B increases?
(a) Kinetic
(b) Total
(c) Mechanical
(d) Internal
When a hot liquid is mixed with a cold liquid, the temperature of the mixture ____________ .
Two bodies at different temperatures are mixed in a calorimeter. Which of the following quantities remains conserved?
The mechanical equivalent of heat ____________ .
The heat capacity of a body depends on
(a) the heat given
(b) the temperature raised
(c) the mass of the body
(d) the material of the body
The temperature of a solid object is observed to be constant during a period. In this period
(a) heat may have been supplied to the body
(b) heat may have been extracted from the body
(c) no heat is supplied to the body
(d) no heat is extracted from the body
Heat and work are equivalent. This means, ____________ .
A metre scale made of steel is calibrated at 20°C to give correct reading. Find the distance between the 50 cm mark and the 51 cm mark if the scale is used at 10°C. Coefficient of linear expansion of steel is 1.1 × 10–5 °C–1.
A circular hole of diameter 2.00 cm is made in an aluminium plate at 0°C. What will be the diameter at 100°C? α for aluminium = 2.3 × 10–5 °C–1.
A steel wire of cross-sectional area 0.5 mm2 is held between two fixed supports. If the wire is just taut at 20°C, determine the tension when the temperature falls to 0°C. Coefficient of linear expansion of steel is 1.2 × 10–5 °C–1 and its Young's modulus is 2.0 × 10–11 Nm–2.
Answer the following question.
Clearly, state the difference between heat and temperature?
Define one mole.
Two tumblers of A and B have water at 50°C temperature. If the water from A and B is poured into tumbler C. The temperature of C is ______.
Two objects are said to be in thermal contact if they can exchange heat energy.
Heat given to a body that raises its temperature by 1°C is ______.
The temperature of a liquid drops from 365 K to 361 K in 2 min. Find the time during which the temperature of the liquid drops from 344 K to 342 K.
(Take, room temperature = 293 K)
