Advertisements
Advertisements
प्रश्न
The logic gate which produces LOW output when one of the input is HIGH and produces
HIGH output only when all of its inputs are LOW is called _______.
(A) AND gate
(B) OR gate
(C) NOR gate
(D) NAND gate
उत्तर
(C) NOR gate
APPEARS IN
संबंधित प्रश्न
Identify the logic gates marked 'P' and 'Q' in the given circuit. Write the truth table for the combination.
You are given the two circuits as shown in following figure. Show that circuit
- acts as OR gate while the circuit
- acts as AND gate.
(a)
(b)
Write the truth table for circuit given in figure below consisting of NOR gates and identify the logic operation (OR, AND, NOT) which this circuit is performing.
(Hint: A = 0, B = 1 then A and B inputs of second NOR gate will be 0 and hence Y=1. Similarly work out the values of Y for other combinations of A and B. Compare with the truth table of OR, AND, NOT gates and find the correct one.)
You are given a circuit below. Write its truth table. Hence, identify the logic operation carried out by this circuit. Draw the logic symbol of the gate it corresponds to.
Identify the logic gate represented by the circuit as shown and write its truth table.
What will be the values of input A and B for the Boolean expression `overline ((A +B) .(A*B)) =1?`
An AND gate can be prepared by repetitive use of
(a) NOT gate
(b) OR gate
(c) NAND gate
(d) NOR gate.
Let \[X = A \overline{ BC} + B\overline{ CA} + C\overline{AB } .\] Evaluate X for A = B = C = 1.
Design a logical circuit using AND, OR and NOT gates to evaluate \[A \overline { BC } + B \overline{ CA }\] .
Show that \[AB + \overline {AB }\] is always 1.
The amplification factor of a triode operating in the linear region depends strongly on ____________ .
Show the variation of voltage with time, for a digital signal.
With the help of a diagram, show how you can use several NAND gates to obtain an OR gate.
Useful Constants and Relations :
| 1. Speed of Light in Vacuum | (c) = 3.00 x 108 m/s |
| 2. Charge of a proton | (e) = 1.60 x 10-19C |
| 3. Planck's Constant | (h) = 6.6 x 10-34 Js |
| 4. Permeability of vacuum | (μ0) = 4π x 10-7 Hm-1 |
| 5. Electron Volt | (1eV ) = 1.6 x 10 |
| 6. Unified Atomic Mass Unit | (1u) = 931 MeV |
| (π) = 3.14 | |
| ( ln 2 ) = 0.693 |
The outputs of two NOT gates are fed to a NOR gate. Draw the logic circuit of the combination of gates. Write its truth table. Identify the gate equivalent to this circuit.
The Boolean expression for NAND gate is
The output of 2-input or gate is zero only when its
For the given circuit, the input digital signals are applied at terminals A, B, and C. What would be the output at terminal y?
For the given circuit, the input digital signals are applied at the terminals A, B and C. What would be the output at the terminal y?
How would you set up a circuit to obtain NOT gate using a transistor?
Draw the output signals C1 and C2 in the given combination of gates (Figure).
In the logic circuit shown in the figure, if input A and B are 0 to 1 respectively, the output at Y would be 'x'. The value of x is ______.
Identify the logic operation carried out by the given circuit:
The given figure shows the waveforms for two inputs A and B and that for the output Y of a logic circuit. The logic circuit is ______.
Which of the following gives a reversible operation?
