Advertisements
Advertisements
प्रश्न
There are two sources of light, each emitting with a power of 100 W. One emits X-rays of wavelength 1 nm and the other visible light at 500 nm. Find the ratio of number of photons of X-rays to the photons of visible light of the given wavelength?
उत्तर
1. X-rays were discovered by scientist Roentgen which is why they are also called Roentgen rays.
2. Roentgen discovered that when the pressure inside a discharge tube is kept at 10“3 mm of Hg and the potential difference is kept at 25 kV, then some unknown radiations (X-rays) are emitted by the anode.
3. There are three essential requirements for the production of X-rays.
- A source of electron
- An arrangement to accelerate the electrons
- A target of suitable material of high atomic weight and high melting point on which these high-speed electrons strike.
Here in this problem, total energy will be constant.
Let us assume the wavelength of X-rays is λ1 and the wavelength of visible light is λ2.
Given, P = 100 W
λ1 = 1 nm
and λ2 = 500 nm
Let n1 and n2 be the number of photons of X-rays and visible light emitted from the two sources per sec.
So, `E/t = P = n_1 (hc)/λ_1 = n_2 (hc)/λ_2`
⇒ `n_1/λ_1 = n_2/λ_2`
⇒ `n_1/n_2 = λ_1/λ_2 = 1/500`
Important point: The wavelength of characteristics of X-ray doesn't depend on accelerating voltage. It depends on the atomic number (Z) of the target material. In characteristic X-ray spectrum λKα < λLα < λMα and Vkα < VLα < VMα. Also λKα < λKβ < λKγ
APPEARS IN
संबंधित प्रश्न
Monochromatic light of wavelength 632.8 nm is produced by a helium-neon laser. The power emitted is 9.42 mW.
(a) Find the energy and momentum of each photon in the light beam,
(b) How many photons per second, on average, arrive at a target irradiated by this beam? (Assume the beam to have uniform cross-section which is less than the target area), and
(c) How fast does a hydrogen atom have to travel in order to have the same momentum as that of the photon?
A 100 W sodium lamp radiates energy uniformly in all directions. The lamp is located at the centre of a large sphere that absorbs all the sodium light which is incident on it. The wavelength of the sodium light is 589 nm.
(a) What is the energy per photon associated with the sodium light?
(b) At what rate are the photons delivered to the sphere?
Estimating the following two numbers should be interesting. The first number will tell you why radio engineers do not need to worry much about photons! The second number tells you why our eye can never ‘count photons’, even in the barely detectable light.
The number of photons emitted per second by a Medium wave transmitter of 10 kW power, emitting radio waves of wavelength 500 m.
When an electron strikes the target in a Coolidge tube, its entire kinetic energy
(a) is converted into a photon
(b) may be converted into a photon
(c) is converted into heat
(d) may be converted into heat.
If E and p are the energy and the momentum of a photon respectively, then on reducing the wavelength of photon
The number of photons per second on an average emitted by the source of monochromatic light of wavelength 600 nm, when it delivers the power of 3.3 × 10−3 watts will be ______ (h = 6.6 × 10−34 Js).
The number of photons per second on an average emitted by the source of monochromatic light of wavelength 600 nm, when it delivers the power of 3.3 × 10−3 watts will be ______ (h = 6.6 × 10−34 Js)
Photons absorbed in matter are converted to heat. A source emitting n photon/sec of frequency ν is used to convert 1 kg of ice at 0°C to water at 0°C. Then, the time T taken for the conversion ______.
- decreases with increasing n, with ν fixed.
- decreases with n fixed, ν increasing.
- remains constant with n and ν changing such that n ν = constant.
- increases when the product n ν increases.
The energy of a photon of wavelength 663 nm is ______.
The energy of a photon of wavelength λ is ______.
