Advertisements
Advertisements
प्रश्न
What is the function of a bandpass filter used in a modulator for obtaining AM signal?
उत्तर
The output produced by the square-law device is passed to the bandpass filter which rejects the dc and the sinusoids of frequencies wm, 2wm, and 2wc and retains the frequencies wc, wc – wm, and wc + wm. The output of the bandpass filter is an AM wave.
APPEARS IN
संबंधित प्रश्न
Explain the terms : Transmitter in communication system
Write the functions of the following in communication systems:
Receiver
Explain the terms Demodulation used in Communication System.
Distinguish between point to point and broadcast modes of communication. Give an example of each.
Write the function of receiver in communication system.
Write the functions of the transducer and repeaters.
Audio sine waves of 3 kHz frequency are used to amplitude modulate a carrier signal of 1.5 MHz. Which of the following statements are true?
- The sideband frequencies are 1506 kHz and 1494 kHz.
- The bandwidth required for amplitude modulation is 6 kHz.
- The bandwidth required for amplitude modulation is 3 MHz.
- The side band frequencies are 1503 kHz and 1497 kHz.
Which of the following would produce analog signals and which would produce digital signals?
- A vibrating tuning fork.
- Musical sound due to a vibrating sitar string.
- Light pulse.
- Output of NAND gate.
Figure shows a communication system. What is the output power when input signal is of 1.01 mW? (gain in dB = 10 log10 (Po/Pi).
An audio signal is modulated by a carrier wave of 20 MHz such that the bandwidth required for modulation is 3 kHz. Could this wave be demodulated by a diode detector which has the values of R and C as
- R = 1 kΩ, C = 0.01 µF.
- R = 10 kΩ, C = 0.01 µF.
- R = 10 kΩ, C = 0.1 µF.
