Advertisements
Advertisements
प्रश्न
Why is choke coil needed in the use of fluorescent tubes with ac mains?
उत्तर
A choke coil is an electrical appliance used for controlling current in an a.c. circuit. Therefore, if we use a resistance R for the same purpose, a lot of energy would be wasted in the form of heat etc
APPEARS IN
संबंधित प्रश्न
How will you define Q-factor?
Obtain an expression for average power of AC over a cycle. Discuss its special cases.
Calculate the instantaneous value at 60°, average value and RMS value of an alternating current whose peak value is 20 A.
A 60 µF capacitor is connected to a 110 V, 60 Hz ac supply. Determine the rms value of the current in the circuit.
A capacitor is used in the primary circuit of an induction coil.
An alternating voltage source of variable angular frequency ‘w’ and fixed amplitude ‘V’ is connected in series with a capacitance C and electric bulb of resistance R(inductance zero). When ‘w’ is increased ______.
A direct current of 4 A and an alternating current of peak value 4 A flow through resistance of 3Ω and 2Ω respectively. The ratio of heat produced in the two resistances in same interval of time will be ______.
A series CR circuit with R = 200 Ω and C = (50/π) µF is connected across an ac source of peak voltage ε0 = 100 V and frequency v = 50 Hz. Calculate (a) impedance of the circuit (Z), (b) phase angle (Φ), and (c) voltage across the resistor.
An alternating current I = 14 sin (100 πt) A passes through a series combination of a resistor of 30 Ω and an inductor of `(2/(5pi))` H. Taking `sqrt2` = 1.4 calculate the rms value of the voltage drops across the resistor and the inductor.
