Advertisements
Advertisements
प्रश्न
Write the control limits for the R chart
उत्तर
The calculation of control limits for R chart in two different cases are
| Case (i) When SD is given |
Case (ii) When SD is not given |
|
UCL = `bar"R" + 3sigma_"R"` CL = `bar"R"` LCL = `bar"R" - 3sigma_"R"` |
UCL = `"D"_4bar"R"` CL = `bar"R"` LCL = `"D"_4bar"R"` |
The values of A2, D2 and D4 are given in the table.
APPEARS IN
संबंधित प्रश्न
Define chance cause
Define assignable cause
Define a control chart
Define R chart
Ten samples each of size five are drawn at regular intervals from a manufacturing process. The sample means `(bar"X")` and their ranges (R) are given below:
| Sample number | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
| `bar"X"` | 49 | 45 | 48 | 53 | 39 | 47 | 46 | 39 | 51 | 45 |
| R | 7 | 5 | 7 | 9 | 5 | 8 | 8 | 6 | 7 | 6 |
Calculate the control limits in respect of `bar"X"` chart. (Given A2 = 0.58, D3 = 0 and D4 = 2.115) Comment on the state of control
Choose the correct alternative:
The assignable causes can occur due to
Choose the correct alternative:
A typical control charts consists of
Choose the correct alternative:
R is calculated using
From the following data, calculate the control limits for the mean and range chart.
| Sample No. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
| Sample Observations |
50 | 21 | 50 | 48 | 46 | 55 | 45 | 50 | 47 | 56 |
| 55 | 50 | 53 | 53 | 50 | 51 | 48 | 56 | 53 | 53 | |
| 52 | 53 | 48 | 50 | 44 | 56 | 53 | 54 | 549 | 55 | |
| 49 | 50 | 52 | 51 | 48 | 47 | 48 | 53 | 52 | 54 | |
| 54 | 46 | 47 | 53 | 47 | 51 | 51 | 47 | 54 | 52 |
The following are the sample means and I ranges for 10 samples, each of size 5. Calculate; the control limits for the mean chart and range chart and state whether the process is in control or not.
| Sample Number | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
| Mean | 5.10 | 4.98 | 5.02 | 4.96 | 4.96 | 5.04 | 4.94 | 4.92 | 4.92 | 4.98 |
| Range | 0.3 | 0.4 | 0.2 | 0.4 | 0.1 | 0.1 | 0.8 | 0.5 | 0.3 | 0.5 |
