मराठी
कर्नाटक बोर्ड पी.यू.सी.पीयूसी विज्ञान इयत्ता ११

A vessel of volume V0 contains an ideal gas at pressure p0 and temperature T. Gas is continuously pumped out of this vessel at a constant volume-rate dV/dt = r keeping the temperature constant. - Physics

Advertisements
Advertisements

प्रश्न

A vessel of volume V0 contains an ideal gas at pressure p0 and temperature T. Gas is continuously pumped out of this vessel at a constant volume-rate dV/dt = r keeping the temperature constant. The pressure of the gas being taken out equals the pressure inside the vessel. Find (a) the pressure of the gas as a function of time, (b) the time taken before half the original gas is pumped out.

Use R = 8.3 J K−1 mol−1

संख्यात्मक

उत्तर

Let P be the pressure and n be the number of moles of gas inside the vessel at any given time t .
Suppose a small amount of gas of dn moles is pumped out and the decrease in pressure is dP .

Applying equation of state to the gas inside the vessel , we get 

`(P - dP) V_0 = (n - dn) RT`

⇒ `PV_0 - dPV_0 = nRT - dnRT`

But `PV_0 = nRT`

⇒ `V_0dP = dnRT`                 ..............(1)

The pressure of the gas taken out is equal to the inner pressure .

Applying equation of state , we get 

`(P - dP) dV = dnRT`

⇒ `PdV = dnRT`                ..........(2)

From eq. (1) and eq. (2) , we get

`V_0dP = PdV`

⇒ `(dP)/P = (dV)/V_0`

`(dV)/dt = r`

⇒ `dV = rdt`

⇒ `dV = -rdt`               ........(3)             [Since                   pressures decreases , rate is negative]

Now , 

`(dP)/P = (-rdt)/V_0`   [From eq. (3)]

(a)

Integrating the equation P = P0 to P = P and time t = 0 to t = t , we get

`∫_(P0)^P = ∫_0^t`

⇒ `In  P - In  P_0 = - (rt)/V_0`

⇒ `In (P/P_0) = - (rt) /V_0`

⇒ `P = P_0e^((-rt)/V_0)`

(b)

`P = P_0/2`

`P_0/2 = P_0e^((-rt)/V_0)`

⇒ `e^((rt)/V_0) = 2`

⇒`(rt)/V_0 = In  2`

⇒ `t = (V_0  In  2)/r`

shaalaa.com
Kinetic Theory of Gases - Concept of Pressure
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
पाठ 2: Kinetic Theory of Gases - Exercises [पृष्ठ ३६]

APPEARS IN

एचसी वर्मा Concepts of Physics Vol. 2 [English] Class 11 and 12
पाठ 2 Kinetic Theory of Gases
Exercises | Q 37 | पृष्ठ ३६

संबंधित प्रश्‍न

While gas from a cooking gas cylinder is used, the pressure does not fall appreciably till the last few minutes. Why?


If it were possible for a gas in a container to reach the temperature 0 K, its pressure would be zero. Would the molecules not collide with the walls? Would they not transfer momentum to the walls?


The pressure of a gas kept in an isothermal container is 200 kPa. If half the gas is removed from it, the pressure will be


2 g of hydrogen is sealed in a vessel of volume 0.02 m3 and is maintained at 300 K. Calculate the pressure in the vessel.

Use R=8.3J K-1 mol-1


Air is pumped into an automobile tyre's tube up to a pressure of 200 kPa in the morning when the air temperature is 20°C. During the day the temperature rises to 40°C and the tube expands by 2%. Calculate the pressure of the air in the tube at this temperature.


An air bubble of radius 2.0 mm is formed at the bottom of a 3.3 m deep river. Calculate the radius of the bubble as it comes to the surface. Atmospheric pressure = 1.0 × 105 Pa and density of water = 1000 kg m−3.


A vessel contains 1.60 g of oxygen and 2.80 g of nitrogen. The temperature is maintained at 300 K and the volume of the vessel is 0.166 m3. Find the pressure of the mixture.

Use R = 8.3 J K-1 mol-1


A container of volume 50 cc contains air (mean molecular weight = 28.8 g) and is open to atmosphere where the pressure is 100 kPa. The container is kept in a bath containing melting ice (0°C). (a) Find the mass of the air in the container when thermal equilibrium is reached. (b) The container is now placed in another bath containing boiling water (100°C). Find the mass of air in the container. (c) The container is now closed and placed in the melting-ice bath. Find the pressure of the air when thermal equilibrium is reached.

Use R = 8.3 J K-1 mol-1


Is a slow process always isothermal? Is a quick process always adiabatic?


In an adiabatic process on a gas with γ = 1.4, the pressure is increased by 0.5%. The volume decreases by about


A gas is enclosed in a cylindrical can fitted with a piston. The walls of the can and the piston are adiabatic. The initial pressure, volume and temperature of the gas are 100 kPa, 400 cm3 and 300 K, respectively. The ratio of the specific heat capacities of  the gas, Cp / Cv = 1.5. Find the pressure and the temperature of the gas if it is (a) suddenly compressed (b) slowly compressed to 100 cm3.


The initial pressure and volume of a given mass of a gas (Cp/Cv = γ) are p0 and V0. The gas can exchange heat with the surrounding. (a) It is slowly compressed to a volume V0/2 and then suddenly compressed to V0/4. Find the final pressure. (b) If the gas is suddenly compressed from the volume V0 to V0/2 and then slowly compressed to V0/4, what will be the final pressure?


Three samples A, B and C of the same gas (γ = 1.5) have equal volumes and temperatures. The volume of each sample is doubled, the process being isothermal for A, adiabatic for B and isobaric for C. If the final pressures are equal for the three samples, find the ratio of the initial pressures.


On a winter day, the outside temperature is 0°C and relative humidity 40%. The air from outside comes into a room and is heated to 20°C. What is the relative humidity in the room? The saturation vapour pressure at 0°C is 4.6 mm of mercury and at 20°C it is 18 mm of mercury.


If 1022 gas molecules each of mass 10-26 kg collide with a surface (perpendicular to it) elastically per second over an area of 1 m2 with a speed of 104 m/s, the pressure exerted by the gas molecules will be of the order of ______.


In a cubical box of volume V, there are N molecules of a gas moving randomly. If m is mass of each molecule and v2 is the mean square of x component of the velocity of molecules, then the pressure of the gas is ______.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×