Advertisements
Advertisements
प्रश्न
If the radius of a cylinder is doubled and its curved surface area is not changed, the height must be halved.
पर्याय
True
False
उत्तर
This statement is True.
Explanation:
Let the radius and height of a cylinder be r and h respectively.
Curved surface area of a cylinder = 2πrh
If the radius of a cylinder = 2r and height = H.
And curved surface area of a cylinder is not changed.
∴ 2πrh = 2π(2r) × H
`\implies H = (2pirh)/(4pir)`
`\implies H = h/2`
Hence, the height of a cylinder must be halved.
APPEARS IN
संबंधित प्रश्न
It is required to make a closed cylindrical tank of height 1 m and base diameter 140 cm from a metal sheet. How many square meters of the sheet are required for the same?
`["Assume "pi=22/7]`
A solid cylinder has total surface area of 462 cm2. Its curved surface area is one-third of its total surface area. Find the radius and height of the cylinder.
A storage tank consists of a circular cylinder with a hemisphere adjoined on either end. If the
external diameter of the cylinder be 1.4 m and its length be 8 m, find the cost of painting it
on the outside at the rate of Rs. 10 per `m^2`.
A rectangular strip 25 cm × 7 cm is rotated about the long side. Find The total surface area of the solid thus generated.
From a tap of inner radius 0.75 cm, water flows at the rate of 7 m per second. Find the volume in litres of water delivered by the pipe in one hour.
If the height of a cylinder is doubled and radius remains the same, then volume will be ______.
The length of a road roller is 2.1 m and its diameter is 1.4 m. For levelling a ground 500 rotations of the road roller were required. How much area of ground was levelled by the road roller? Find the cost of levelling at the rate of Rs. 7 per sq. m.
The total surface area of a hollow metal cylinder, open at both ends of external radius 8 cm and height 10 cm is 338π cm2. Taking r to be inner radius, write down an equation in r and use it to state the thickness of the metal in the cylinder.
The radius of a solid cylinder decreases by 10% and its height increases by 20%. Find the change in percentage of its volume and curved surface area
Find the area to be painted in the following block with a cylindrical hole. Given that length is 15 cm, width 12 cm, height 20 cm and radius of the hole 2.8 cm.
