Advertisements
Advertisements
प्रश्न
In following figure, shows a block and tackle system of pulleys used to lift a load.
- How many strands of tackle are supporting the load?
- Draw arrows to represent tension T in each strand.
- What is the mechanical advantage of the system?
- When load is pulled up by a distance 1 m, how far does the effort end move?
- How much effort is needed to lift a load of 100 N?
- What will be it's V.R. if the weight of the movable block is doubled?
उत्तर
(a) 4 stands marked 1, 2, 3, and 4 support the load L.
(b) The strands' tension in the T direction is shown.
(c) M.A. = L = 4T and E = T
M.A. = `L/E`
= `(4T)/T = 4`
(d) As load is pulled up by 1 m
dL = 1m = d
distance moved by effort = dE = nd
V.R. = `d_E/d_L`
= `(nd)/d`
= n = 4m
(e) E = ?
L = 100 N, M.A. = 4
M.A. = `L/E`
`4 = 100/E`
∴ 4E = 100
E = `100 / 4`
E = 25 N
(f) Velocity Ratio of the system = No. of Pulleys = 4
APPEARS IN
संबंधित प्रश्न
A coolie uses a sloping wooden plank of length 2.0 m to push up a drum of mass 100 kg into the truck at a height 1.0 m.
(a) What is the mechanical advantage of the sloping plank?
(b) How much effort is needed to push the drum up into the truck?
What assumption have you made in arriving at the answer in part (b) above?
A gear system has one wheel with 10 teeth and the other wheel with 50 teeth. Calculate the gain in speed and the gain in torque that you can obtain using them. What will be the gear ration in each case?
A Woman draws water from a well using a fixed pulley. The mass of bucket and water together is 6 kg. The force applied by the woman is 70 N. Calculate the mechanical advantage. (Take g = 10 m s-2)
A block and tackle system has 5 pulleys. If an effort 0f 1000 N is needed in the downward direction to raise a load of 4500 N, calculate:
- the mechanical advantage
- the velocity ratio, and
- the efficiency of the system.
In following figure, shows a system of four pulleys, The upper two pulleys are fixed and the lower two are movable.
- Draw a string around the pulleys. Also show the place and direction in which the effort if applied.
- What is the velocity ratio of the system?
- How are load and effort of the pulley system related?
- What assumption do you make in arriving at your answer in part (c)?
Class I lever can have M.A. = 1, M.A. < 1 and M.A. > 1. Explain each giving examples.
A fixed pulley is driven by a 100 kg mass falling at a rate of 8.0 m in 4.0 s. It lifts a load of 75.0 kgf. Calculate the efficiency of the pulley.
A block and tackle system has the velocity ratio 3. Draw a labelled diagram of the system indicating the points of application and the directions of load L and effort E. A man can exert a pull of 200 kgf. If the effort end moves a distance 60 cm, what distance does the load move?
The mechanical advantage of a machine is 5 and its efficiency is 80%. It is used to lift a load of 200 kgf to a height of 20 m. Calculate:
(i) The effort required, and
(ii) The work done on the machine (g = 10 ms−2).
