मराठी

Plastic insulation surrounds a wire having diameter d and length l as shown above. A decrease in the resistance of the wire would be produced by an increase in the ______. - Science

Advertisements
Advertisements

प्रश्न

Plastic insulation surrounds a wire having diameter d and length l as shown above. A decrease in the resistance of the wire would be produced by an increase in the ______.

पर्याय

  • length l of the wire

  • diameter d of the wire

  • temperature of the wire

  • thickness of the plastic insulation

MCQ
रिकाम्या जागा भरा

उत्तर

Plastic insulation surrounds a wire having diameter d and length l as shown above. A decrease in the resistance of the wire would be produced by an increase in the diameter d of the wire.

shaalaa.com
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
2022-2023 (March) Sample

व्हिडिओ ट्यूटोरियलVIEW ALL [1]

संबंधित प्रश्‍न

Use the data in the Table given below to answer the following –

Which among iron and mercury is a better conductor?

Table give below Electrical resistivity of some substances at 20°C

Electrical resistivity of some substances at 20°C
Material Resistivity (Ω m)
Conductors








Silver 1.60 × 10−8
Copper 1.62 × 10−8
Aluminium 2.63 × 10−8
Tungsten 5.20 × 10−8
Nickel 6.84 × 10−8
Iron 10.0 × 10−8
Chromium 12.9 × 10−8
Mercury 94.0 × 10−8
Manganese 1.84 × 10−6
 Alloys


Constantan
(alloy of Cu and Ni)
49 × 10−6
Manganin
(alloy of Cu, Mn and Ni)
44 × 10−6
Nichrome
(alloy of Ni, Cr, Mn and Fe)
100 × 10−6
Insulators Glass 1010 − 1014
Hard rubber 1013 − 1016
Ebonite 1015 − 1017
Diamond 1012 − 1013
Paper (dry) 1012

What is (a) the highest, (b) the lowest total resistance that can be secured by combinations of four coils of resistance 4 Ω, 8 Ω, 12 Ω, 24 Ω?


Two conducting wires of the same material and of equal lengths and equal diameters are first connected in series and then parallel in a circuit across the same potential difference. The ratio of heat produced in series and parallel combinations would be:


A copper wire has diameter 0.5 mm and resistivity of 1.6 × 10−8Ω m. What will be the length of this wire to make its resistance 10 Ω? How much does the resistance change if the diameter is doubled?


Why are copper and aluminium wires usually employed for electricity transmission?


Which has less electrical resistance : a thin wire or a thick wire (of the same length and same material)?


 What is meant by the "resistance of a conductor" ? Write the relation between resistance, potential difference and current.


 What happens to the resistance as the conductor is made thinner?


Name the electrical property of a material whose symbol is "omega".


Calculate the resistance of a copper wire 1.0 km long and 0.50 mm diameter if the resistivity of copper is 1.7 × 10−8 Ω m.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×