Advertisements
Advertisements
प्रश्न
What will be the change in the current if the potential difference is kept constant and the resistance of the circuit is made four times?
- It will remain unchanged.
- It will become four times.
- It will become one-fourth.
- It will become half.
उत्तर
(c) It will become one-fourth.
According to Ohm’s law, the product of current and resistance should remain constant if the potential applied is the same. Hence, if resistance is made four times, then current should be one-fourth.
APPEARS IN
संबंधित प्रश्न
Graph showing the variation of current versus voltage for a material Ga As is shown in the figure. Identify the region of
(i) negative resistance
(ii) where Ohm's law is obeyed.
Will current flow more easily through a thick wire or a thin wire of the same material, when connected to the same source? Why?
Write the formula of resistivity
Write the SI unit of resistivity
Name the unit of electrical resistance and give its symbol.
Name the law which is illustrated by the above V−I graph.
How should the two resistances of 2 ohms each be connected so as to produce an equivalent resistance of 1 ohm?
What is an ohmic resistor? Give one example of an ohmic resistor. Draw a graph to show its current voltage relationship. How is the resistance of the resistor determined from this graph?
Which of the following is an ohmic resistance?
An electric bulb draws 1.2 A current at 6.0 V. Find the resistance of filament of bulb while glowing.
In an experiment of verification of Ohm’s law following observations are obtained.
|
Potential difference V (in volt) |
0.5 | 1.0 | 1.5 | 2.0 | 2.5 |
| current I (in ampere) | 0.2 | 0.4 | 0.6 | 0.8 | 1.0 |
Draw a V-I graph and use this graph to find:
- the potential difference V when the current I is 0.5 A,
- the current I when the potential difference V is 0.75 V,
- the resistance in a circuit.
In the circuit shown below in Fig, calculate the value of x if the equivalent resistance between A and B is 4 Ω.
In the circuit shown in the figure, find the total resistance of the circuit and the current in the arm AD.
How does an increase in the temperature affect the specific resistance of a :
(i) Metal and
(ii) Semiconductor ?
Two metallic spheres A and B kept on insulating stands are in contact with each other. A positively charged rod P is brought near the sphere A as shown in the figure. The two spheres are separated from each other, and the rod P is removed. What will be the nature of charges on spheres A and B?
Consider the sacle of voltmeter shown in the diagram and answer the following questions :
(a) What is the least count of the voltmeter?
(b) What is the reading shown by the voltmeter ?
(c) If the voltmeter is connected across a resistor of 20 `Omega` how much current is flowing through the resistor?
What is meant by the drift speed of free electrons?
State and define Ohm’s law.
What are ohmic conductors? Give one exmaple. Draw a graph showing the current-voltage relationship for an ohmic conductor.
An ammeter placed in series with an electric radiator reads 0.5 amps and a voltmeter placed across it reads 230 volts. What is the resistance of the radiator?
The ratio of the potential difference to the current is known as ________.
Ohm’s law states the relationship between power and voltage.
State Ohm’s law.
Define Current density.
State microscopic form of Ohm’s law.
Explain the equivalent resistance of a series resistor network.
An electronics hobbyist is building a radio which requires 150 Ω in her circuit, but she has only 220 Ω, 79 Ω, and 92 Ω resistors available. How can she connect the available resistors to get the desired value of resistance?
Two cells each of 5V are connected in series across an 8Ω resistor and three parallel resistors of 4Ω, 6Ω, and 12Ω. Draw a circuit diagram for the above arrangement. Calculate
- the current drawn from the cell
- current through each resistor
The unit of specific resistance is ____________.
The slope of voltage (V) versus current (I) is called:
Assertion: The statement of Ohm’s law is K = IR.
Reason: V = IR is the equation which defines resistance.
What is the resistance of a conductor through which a current of 0.5 A flows when a potential difference of 2V is applied across its ends?
What is meant by resistance of a conductor ? Define its SI unit.
A current of 3.2 mA flows through a conductor. If charge on an electron is - 1.6 × 10-19 coulomb, find the number of electrons that will pass each second through the cross section of that conductor.
