Advertisements
Advertisements
Question
Calculate force per unit length acting on the wire B due to the current flowing in the wire A.(See
Figure 2 below)
Solution
`F/l = mu_0/(4pi) (2I_1I_2)/r`
`10^(-7) xx (2xx20xx25xx75)/0.01`
= 0.03 N/m
APPEARS IN
RELATED QUESTIONS
Two metallic wires, P1 and P2 of the same material and same length but different cross-sectional areas, A1 and A2 are joined together and connected to a source of emf. Find the ratio of the drift velocities of free electrons in the two wires when they are connected (i) in series, and (ii) in parallel.
Choose the correct alternative.
Five dry cells each of voltage 1.5 V are connected as shown in the diagram
What is the overall voltage with this arrangement?
Two cells of 1.25 V and 0.75 V are connected in series with anode of one connected to anode of the other. The effective voltage will be ______.
Two metal wires of identical dimensions are connected in parallel. If σ1 and σ2 are the conductivities of the metal wires respectively, the effective conductivity of the combination is
When cells are connected in parallel, then ______
Two cells of emf’s approximately 5V and 10V are to be accurately compared using a potentiometer of length 400 cm.
First a set of n equal resistors of R each are connected in series to a battery of emf E and internal resistance R. A current I is observed to flow. Then the n resistors are connected in parallel to the same battery. It is observed that the current is increased 10 times. What is ‘n’?
Two cells of emfs E1 and E2 and internal resistances r1 and r2 respectively are connected in parallel as shown in the figure. Deduce the expression for the
- equivalent emf of the combination
- equivalent internal resistance of the combination
- potential difference between the points A and B.
The equivalent resistance of series combination of two resistors is 's'. When they are connected in parallel, the equivalent resistance is 'p'. If s = np, then the minimum value for n is ______. (Round off to the Nearest Integer)
Two cells of emf E1 and E2 and internal resistances r1 and r2 are connected in parallel, with their terminals of the same polarity connected together. Obtain an expression for the equivalent emf of the combination.
