Advertisements
Advertisements
Question
State properties of an ideal fluid.
Solution
An ideal fluid has the following properties:
- It is incompressible i.e., its density is constant.
- Its flow is irrotational i.e., its flow is smooth with no turbulence in the flow.
- It is non-viscous i.e., there is no internal friction in the flow and hence the fluid has no viscosity.
- Its flow is steady i.e., its velocity at each point is constant in time.
RELATED QUESTIONS
Multiple Choice Question.
Two capillary tubes of radii 0.3 cm and 0.6 cm are dipped in the same liquid. The ratio of heights through which the liquid will rise in the tubes is
Why is a low-density liquid used as a manometric liquid in a physics laboratory?
What is an incompressible fluid?
The speed of water is 2m/s through a pipe of internal diameter 10 cm. What should be the internal diameter of the nozzle of the pipe if the speed of the water at nozzle is 4 m/s?
With what velocity does water flow out of an orifice in a tank with gauge pressure 4 × 105 N/m2 before the flow starts? Density of water = 1000 kg/m3.
Why two or more mercury drops form a single drop when brought in contact with each other?
The pressure of water inside a closed pipe is 3 × 105 N/m2. This pressure reduces to 2 × 105 N/m2 on opening the valve of the pipe. Calculate the speed of water flowing through the pipe. [Density of water = 1000 kg/m3].
How much work is required to form a bubble of 2 cm radius from the soap solution having surface tension 0.07 N/m?
A rectangular wireframe of size 2 cm x 2 cm, is dipped in a soap solution and taken out. A soap film is formed, if the size of the film is changed to 3 cm x 3 cm, Calculate the work done in the process. The surface tension of the soap film is 3 x 10-2 N/m.
Unit of the coefficient of viscosity is ______
Two capillary tubes of radii 0.6 cm and 0.3 cm are dipped in the same liquid. The ratio of heights through which the liquid will rise in the tubes is ______.
What are cohesive forces?
The density of a metal at normal pressure p is ρ. When it is subjected to an excess pressure, the density becomes ρ'. If K is the bulk modulus of the metal, then the ratio `(ρ"′")/ρ` is ____________.
Two wires having same length and material are stretched by same force. Their diameters are in the ratio 1: 3. The ratio of strain energy per unit volume for these two wires (smaller to larger diameter) when stretched is ______.
