Advertisements
Advertisements
Question
Which of the following measurements is most precise?
Options
5.00 mm
5.00 cm
5.00 m
5.00 km
Solution
5.00 mm
Explanation:
Precision is the degree to which several measurements provide answers very close to each other. It is an indicator of the scatter in the data. The lesser the scatter, the higher the precision.
Let us first check the units. In all the options magnitude is the same but units of measurement are different. As here 5.00 mm has the smallest unit. All given measurements are correct up to two decimal places. However, the absolute error is 0.01 mm which is the least of all four. So it is the most precise.
APPEARS IN
RELATED QUESTIONS
A physical quantity P is related to four observables a, b, c and d as follows:
`P=(a^3b^2)/((sqrtcd))`
The percentage errors of measurement in a, b, c and d are 1%, 3%, 4% and 2%, respectively. What is the percentage error in the quantity P? If the value of P calculated using the above relation turns out to be 3.763, to what value should you round off the result?
Just as precise measurements are necessary in science, it is equally important to be able to make rough estimates of quantities using rudimentary ideas and common observations. Think of ways by which you can estimate the following (where an estimate is difficult to obtain, try to get an upper bound on the quantity):
the total mass of rain-bearing clouds over India during the Monsoon
A certain pendulum clock with a 12 h dial happens to gain 1.0 min/day. After setting the clock to the correct time, how long must one wait until it again indicates the correct time?
One main scale division of a vernier callipers is 'a' cm and nth division of the vernier scale coincide with (n - 1)th division of the main scale. The least count of the callipers in mm is ______.
The least count of the main scale of a vernier callipers is 1 mm . Its vernier scale is divided into 10 divisions and coincide with 9 divisions of the main scale. When jaws are touching each other, the 7th division of vernier scale coincides with a division of main scale and the zero of vernier scale is lying right side of the zero of main scale. When this vernier is used to measure length of cylinder the zero of the vernier scale between 3.1 cm and 3.2 cm and 4th VSD coincides with a main scale division. The length of the cylinder is: (VSD is vernier scale division)
The main scale of a spectrometer is divided into 720 division in all. If circular vernier scale consists of 30 divisions, the least count of the instrument is ______.
(Given: 30 vernier divisions coincide with 29 main scale divisions)
One centimetre on the main scale of vernier callipers is divided into ten equal parts. If 10 divisions of vernier scale coincide with 8 small divisions of the main scale, the least count of the callipers is ______.
A vernier calliper has 20 divisions on the vernier scale, which coincide with 19 on the main scale. The least count of the instrument is 0.1 mm. The main scale divisions are of ______.
Two students measure the weight of a 10 Kg mass using a spring balance and record these readings as:
A: 10Kg, 10Kg, 10.5Kg, 10.5Kg, 9.5Kg
B: 10Kg, 10.1Kg, 10.1Kg, 9.8Kg, 9.9Kg
Then
