Advertisements
Advertisements
प्रश्न
2.2 cubic dm of brass is to be drawn into a cylindrical wire 0.25 cm in diameter. Find the length of the wire.
उत्तर
Diameter of the cylindrical wire = 0.25 cm
Radius of the cylindrical wire = 0.125 cm
Volume of the brass = 2.2 dm3 = 2200 cm3
Volume of the brass = Volume of the cylindrical wire
\[\text{ Length of wire }= \frac{2200 {\text{ cm }}^3}{\frac{22}{7} \times \left( 0. 125\text{ cm }\right)^2} = 44800 cm = 448 m\]
Thus, length of the wire is 448 m.
APPEARS IN
संबंधित प्रश्न
A road roller takes 750 complete revolutions to move once over to level a road. Find the area of the road if the diameter of a road roller is 84 cm and length is 1 m.
Find the ratio between the total surface area of a cylinder to its curved surface area, given that its height and radius are 7.5 cm and 3.5 cm.
A cylindrical vessel, without lid, has to be tin-coated on its both sides. If the radius of the base is 70 cm and its height is 1.4 m, calculate the cost of tin-coating at the rate of Rs. 3.50
per 1000 cm2.
The diameter of roller 1.5 m long is 84 cm. If it takes 100 revolutions to level a playground, find the cost of levelling this ground at the rate of 50 paise per square metre.
The diameter of a roller is 84 cm and its length is 120 cm. It takes 500 complete revolutions moving once over to level a playground. What is the area of the playground?
Find the volume of a cylinder, if the diameter (d) of its base and its altitude (h) are: d = 21 cm, h = 10 cm .
A rectangular sheet of paper 30 cm × 18 cm can be transformed into the curved surface of a right circular cylinder in two ways i.e., either by rolling the paper along its length or by rolling it along its breadth. Find the ratio of the volumes of the two cylinders thus formed.
The pillars of a temple are cylindrically shaped. If each pillar has a circular base of radius 20 cm and height 10 m. How much concrete mixture would be required to build 14 such pillars?
A cylinder with radius r and height h is closed on the top and bottom. Which of the following expressions represents the total surface area of this cylinder?
If diameter of a road roller is 0.9 m and its length is 1.4 m, how much area of a field will be pressed in its 500 rotations? `(π = 22/7)`
