हिंदी

A Cylindrical Tube, Open at Both Ends, is Made of Metal. the Internal Diameter of the Tube is 10.4 Cm and Its Length is 25 Cm. the Thickness of the Metal is 8 Mm Everywhere. - Mathematics

Advertisements
Advertisements

प्रश्न

A cylindrical tube, open at both ends, is made of metal. The internal diameter of the tube is 10.4 cm and its length is 25 cm. The thickness of the metal is 8 mm everywhere. Calculate the volume of the metal

योग

उत्तर

Here, r = Inner radius = 5.2 cm
         R = Outer radius
         t = Thickness = 0.8 cm
        h = Length = 25 cm

R = r + t = 5.2 cm + 0.8 cm = 6 cm
Volume of the metal = π h (R2 - r2)
                          = 22 x  (25) x ((6 )2 - (5.2 )2)
                             7
                          = 704 cm3
Thus, the volume of the metal is 704 cm3.

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
अध्याय 22: Mensuration - III (Surface Area and Volume of a Right Circular Cylinder) - Exercise 22.2 [पृष्ठ २६]

APPEARS IN

आरडी शर्मा Mathematics [English] Class 8
अध्याय 22 Mensuration - III (Surface Area and Volume of a Right Circular Cylinder)
Exercise 22.2 | Q 31 | पृष्ठ २६

वीडियो ट्यूटोरियलVIEW ALL [1]

संबंधित प्रश्न

The difference between inside and outside surfaces of a cylindrical tube 14 cm long is 88 sq. cm. If the volume of the tube is 176 cubic cm, find the inner and outer radii of the tube.


How many litres of water flow out of a pipe having an area of cross-section of 5 cm2 in one minute, if the speed of water in the pipe is 30 cm/sec?


The curved surface area of a cylinder is 1320 cm2 and its base had diameter 21 cm. Find the height and the volume of the cylinder.


How many litres of water flow out of a pipe having an area of cross-section of 5cm2 in one minute, if the speed of water in the pipe is 30 cm/ sec? 


A well with 10 m inside diameter is dug 8.4 m deep. Earth taken out of it is spread all around it to a width of 7.5 m to form an embankment. Find the height of the embankment.


Radius of base of a cylinder is 20 cm and its height is 13 cm, find its curved surface area and total surface area. (π = 3.14)


If diameter of a road roller is 0.9 m and its length is 1.4 m, how much area of a field will be pressed in its 500 rotations? `(π = 22/7)`


The length of a road roller is 2.1 m and its diameter is 1.4 m. For levelling a ground 500 rotations of the road roller were required. How much area of ground was levelled by the road roller? Find the cost of levelling at the rate of Rs. 7 per sq. m.


Find the lateral surface area, total surface area and the volume of the following cylinders: Radius = 4.2cm, Height = 12cm


Find

How much steel was actually used, if `1/12` of the steel actually used was wasted in making the tank.

`["Assume "pi=22/7]`


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×