Advertisements
Advertisements
प्रश्न
How many litres of water flow out of a pipe having an area of cross-section of 5 cm2 in one minute, if the speed of water in the pipe is 30 cm/sec?
उत्तर
We know:
Area of cross section = 5 cm2
Rate = 30 cm/s and
Time =1 min
So, the volume of water flow is:
Volume = Volumetric rate x Time = (30 cm/s)(5 cm2)(60 s/min) = 9000 cm3 = 9 litres
Thus, 9 litres of water flows out of the pipe.
APPEARS IN
संबंधित प्रश्न
In a hot water heating system, there is a cylindrical pipe of length 28 m and diameter 5 cm. Find the total radiating surface in the system.
`["Assume "pi=22/7]`
Curved surface area of a right circular cylinder is 4.4 `m^2`. If the radius of the base of the cylinder is 0.7 m, find its height.
The ratio between the curved surface area and the total surface area of a right circular cylinder is 1 : 2. Prove that its height and radius are equal.
A rectangular sheet of paper 30 cm × 18 cm can be transformed into the curved surface of a right circular cylinder in two ways i.e., either by rolling the paper along its length or by rolling it along its breadth. Find the ratio of the volumes of the two cylinders thus formed.
A well with 10 m inside diameter is dug 8.4 m deep. Earth taken out of it is spread all around it to a width of 7.5 m to form an embankment. Find the height of the embankment.
The radii of two cylinders are in the ratio 2 : 3 and their heights are in the ratio 5 : 3. Calculate the ratio of their volumes and the ratio of their curved surfaces.
The length of a road roller is 2.1 m and its diameter is 1.4 m. For levelling a ground 500 rotations of the road roller were required. How much area of ground was levelled by the road roller? Find the cost of levelling at the rate of Rs. 7 per sq. m.
The total surface area of a hollow metal cylinder, open at both ends of external radius 8 cm and height 10 cm is 338π cm2. Taking r to be inner radius, write down an equation in r and use it to state the thickness of the metal in the cylinder.
A cylindrical tube, open at both ends, is made of metal. The bore (internal diameter) of the tube is 10.4 cm and its length is 25 cm. The thickness of the metal is 8 mm everywhere. Calculate the volume of the metal. Also, find the weight of the tube if 1 cm3 of the metal weighs 1.42 g.
If the radius of a cylinder is doubled and its curved surface area is not changed, the height must be halved.
