Advertisements
Advertisements
प्रश्न
A hemisphere of lead of radius 9 cm is cast into a right circular cone of height 72 cm. Find the radius of the base of the cone.
उत्तर
Radius of hemisphere = 9 cm
Volume of hemisphere = `2/3pir^3= 2/3pixx9xx9xx9 "cm"^3`
Height of cone = 72 cm
Let the radius of the cone be r cm.
Volume of the cone `= 1/3pir^2h=1/3pir^2xx 72 "cm"^3`
The Volume of the hemisphere and cone are equal.
Therefore,
`1/3pir^2xx72xx =2/3xx9xx9xx9xx9`
`r^2 =(2xx9xx9xx9)/72 = 81/4`
`r = sqrt(81/4) = 9/2 = 4.5 "cm"`
The radius of the base of the cone is 4.5 cm.
APPEARS IN
संबंधित प्रश्न
Derive the formula for the curved surface area and total surface area of the frustum of cone.
A bucket is in the form of a frustum of a cone of height 30 cm with radii of its lower and upper ends as 10 cm and 20 cm respectively. Find the capacity and surface area of the bucket. Also, find the cost of milk which can completely fill the container , at thr rate of ₹25 per litre. (Use \[\pi = 3 . 14) .\]
A hemisphere of lead of radius 7 cm is cast into a right circular cone of height 49 cm. Find the radius of the base.
A cone of maximum size is carved out from a cube of edge 14 cm. Find the surface area of the cone and of the remaining solid left out after the cone carved out.
A cylinder with base radius of 8 cm and height of 2 cm is melted to form a cone of height 6 cm. The radius of the cone is
A cone of height 20 cm and radius of base 5 cm is made up of modelling clay. A child reshapes it in the form of a sphere. Find the diameter of the sphere.
A solid metal cone with base radius of 12 cm and height 24 cm is melted to form solid spherical balls of diameter 6 cm each. Find the number of balls thus formed.
A drinking glass is in the shape of a frustum of a cone of height 14 cm. The diameters of its two circular ends are 16 cm and 12 cm. Find the capacity of the glass.
An oil funnel of the tin sheet consists of a cylindrical portion 10 cm long attached to a frustum of a cone. If the total height is 22 cm, the diameter of the cylindrical portion by 8 cm and the diameter of the top of the funnel be 18 cm, then find the area of the tin sheet required to make the funnel.
The curved surface area of a frustum of a cone is πl (r1 + r2), where `l = sqrt(h^2 + (r_1 + r_2)^2)`, r1 and r2 are the radii of the two ends of the frustum and h is the vertical height.
